Expedition Exchange Bulletin Boards

Expedition Exchange Bulletin Boards (http://www.expeditionexchange.com/forums/index.php)
-   Technical Discussions (http://www.expeditionexchange.com/forums/forumdisplay.php?f=6)
-   -   DII Lug Nuts - Impact Gun Socket (http://www.expeditionexchange.com/forums/showthread.php?t=1307)

ronward August 10th, 2009 07:14 AM

DII Lug Nuts - Impact Gun Socket
 
I swap out the alloys and ATs for Disco Steel rims and MTs for the trail. I've got a DeWalt electric impact gun and would like to get the proper size alloy lug nut socket to fit the DII's lugs to make the swap easier. Do the tire shop guys use some sort of torque / extender to prevent over tightening with their air guns? Any advice?

johnlee August 10th, 2009 08:38 AM

The D2's alloy lug nuts are 17/16", just like the D1's lug nuts. Because the D2's lug nuts have a metric thread, I'm guessing the correct socket size for the lug nuts is 27mm, but I prefer to use 17/16" because I think it's a little better fit.

Mike_Rupp August 11th, 2009 08:35 AM

I wouldn't rely on the impact tool to torque the lug nuts on. I use the impact wrench to snug the lug nuts up and then use a 18" breaker bar to finish torquing them on by feel.

nosivad_bor August 11th, 2009 01:07 PM

I've always found the 34/32" socket to fit best

traveltoad August 11th, 2009 01:28 PM

Quote:

Originally Posted by nosivad_bor
I've always found the 34/32" socket to fit best


Hard to find though.

ronward August 11th, 2009 05:32 PM

Got a 27mm deep impact socket from Sears Craftsman. Works perfectly.


All times are GMT -8. The time now is 04:13 AM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2001-2012 Expedition Exchange Incorporated. All rights reserved.