Expedition Exchange Bulletin Boards

Expedition Exchange Bulletin Boards (http://www.expeditionexchange.com/forums/index.php)
-   Technical Discussions (http://www.expeditionexchange.com/forums/forumdisplay.php?f=6)
-   -   RRC Steering Shaft Option (http://www.expeditionexchange.com/forums/showthread.php?t=1391)

greghirst April 5th, 2011 09:46 PM

RRC Steering Shaft Option
 
1 Attachment(s)
The rubber coupler on my steering shaft on my '89 RRC had largely disintegrated a while back and I have been running with a trail fix (2 hose clamps cinched down and holding what was left together).

Yesterday I decided to replace the rubber steering coupler and/or possibly change the shaft to the Disco I shaft that I carry as a back-up. I feel the Disco shaft is superior since it has a smaller rubber coupling and it is also adjustable about an inch which makes it much easier to change out. It also comes with a heat barrier sheath that snaps over the top.

After replacing the coupler, I realized that the Disco shaft is at least a 1/2 inch shorter even with the adjustment all the way out which makes it even easier to change.


All times are GMT -8. The time now is 02:00 PM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2001-2012 Expedition Exchange Incorporated. All rights reserved.