View Single Post
  #27  
Old March 8th, 2007, 05:54 PM
dchapman dchapman is offline
Daniel Chapman
KJ4BXR
 
Join Date: Dec 2005
Location: VA
Posts: 1,126
John,
I'm curious as to why you mounted your rear drive-shaft with the slip yoke toward the axle. I understand that sometimes people do this for a slight advantage in clearance. But, on the other hand, if the splines ever got damaged from a bolder your drive-shaft is junk.

Some might say a bolder making contact with the drive-shaft will cause damage anyway. But from what I've seen, this is not always the case.

Why risk it?
Reply With Quote