Expedition Exchange Bulletin Boards  

Go Back   Expedition Exchange Bulletin Boards > Technical Discussions
User Name
Password
FAQ Members List Calendar Mark Forums Read


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old June 28th, 2010, 10:06 AM
chris snell chris snell is online now
Christopher Snell
NW5W
 
Join Date: Jul 2007
Posts: 1,384
Husky 10 solenoid cover and Brownchurch brush guard

I know that a few of you are running this setup. Have you done any modifications to the solenoid cover to make accessing the solenoid easier? I can't get the cover off unless I pull the entire driver's side of the winch off. The Brownchurch brush guard blocks it. I'm thinking that I would have to trim the cover or cut it in half if I want to gain easy access to the solenoid.

I spent all weekend cabling up the winch and re-working my battery box. Imagine my disappointment when I plugged in my remote and got only a "click" from the solenoid. Winch is pulling a lot of amps (engine RPMs drop sharply) but the drum doesn't turn. Wish it was easier to get to the solenoid to troubleshoot.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -8. The time now is 07:45 PM.




Copyright 2001-2012 Expedition Exchange Incorporated. All rights reserved.
Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.