Expedition Exchange Bulletin Boards  

Go Back   Expedition Exchange Bulletin Boards > Technical Discussions
User Name
Password
FAQ Members List Calendar Mark Forums Read


Reply
 
Thread Tools Display Modes
  #1  
Old April 26th, 2004, 08:52 AM
Robbie Robbie is offline
Rob
 
Join Date: Apr 2004
Posts: 4
Replacement Brake Lines

Hey EE - replacing my brake lines with your pp lines, should I replace the coil protector on all the lines, or just the front lines? I can't remember when Ho's lines broke apart if the recommendation was to put two of the protectors on the front and leave the rears unprotected, or just swap out all the coil protectors one for one? Thanks.

-Robbie
Reply With Quote
  #2  
Old April 26th, 2004, 09:01 AM
hochung hochung is offline
Ho Chung
W6HC
 
Join Date: Sep 2003
Location: Rancho Palos Verdes, CA
Posts: 2,006
if you have enough of the coil things, put them in all 4.
otherwise, the one to protect is the driver front.
i put 2 of them, and made them overlap at the place where it rubs the panhard rod bolt.

http://www.expeditionexchange.com/hoshos/hose2.jpg
____________________
Ho Chung

Reply With Quote
  #3  
Old April 26th, 2004, 09:38 AM
Robbie Robbie is offline
Rob
 
Join Date: Apr 2004
Posts: 4
Thanks Ho, that's what I think I will do as well. The rear didn't look like it would rub all that much, but wanted to check. If I get my hands on another set, will then put on the rear as well.
Reply With Quote
  #4  
Old April 26th, 2004, 02:30 PM
hochung hochung is offline
Ho Chung
W6HC
 
Join Date: Sep 2003
Location: Rancho Palos Verdes, CA
Posts: 2,006
actually, thinking back now, put the coil thing only if you can get 2 per hose. this way you can overlap them and fit them without any play.

if you put only one, it'll be too short for the paragon lines. so the coil thing will be moving around, and kinda looks mickey mouse too.
____________________
Ho Chung

Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Field Kitchen Advice johnlee General 1661 October 31st, 2017 11:21 AM
My experience with RUD chains michael Technical Discussions 60 October 18th, 2014 02:32 PM
H7 Replacement Bulbs gahill2 Technical Discussions 4 March 6th, 2008 04:26 PM
'04 Discovery Audio Replacement ronward Technical Discussions 29 November 21st, 2007 09:25 PM
Recovery Strap Replacement michael Technical Discussions 2 February 14th, 2005 09:14 AM


All times are GMT -8. The time now is 11:31 PM.




Copyright © 2001-2012 Expedition Exchange Incorporated. All rights reserved.
Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.