Expedition Exchange Bulletin Boards  

Go Back   Expedition Exchange Bulletin Boards > Technical Discussions
User Name
Password
FAQ Members List Calendar Mark Forums Read


Reply
 
Thread Tools Display Modes
  #1  
Old December 13th, 2004, 09:28 PM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
Cruise control switch pinouts

Does anyone know where I can find the pinouts for the 99 D2 cruise control switch?

Anyone know where to find a harness to go with the cruise control switch?

I have two switches. One for use with lights, and the other to control an "accessory on" signal to a navigation system in the truck.

Thanks,
Craig
Reply With Quote
  #2  
Old December 13th, 2004, 10:35 PM
hochung hochung is offline
Ho Chung
W6HC
 
Join Date: Sep 2003
Location: Rancho Palos Verdes, CA
Posts: 2,006
hmm, you mean this?

____________________
Ho Chung

Reply With Quote
  #3  
Old December 13th, 2004, 11:55 PM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
Yeah... those would work. Is that a stock land rover part?

Do you have the pinouts too?
Reply With Quote
  #4  
Old December 14th, 2004, 12:19 AM
hochung hochung is offline
Ho Chung
W6HC
 
Join Date: Sep 2003
Location: Rancho Palos Verdes, CA
Posts: 2,006



just like that. connector and 5 of the "pins"

$5.
____________________
Ho Chung

Reply With Quote
  #5  
Old December 14th, 2004, 01:00 AM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
Hmmm.... I must be wording my question funny. I am trying to figure out a couple of things: Where can I buy the harness that is shown above, and once I have one how do I wire it up?

By "pinouts" I am trying to find out which pin is 12v positive, which pin is ground, which pin goes to the accessory, etc. I need to know this for each pin 1-5 (they are numbered). Does anyone have this info?

Thanks,
--Craig
Reply With Quote
  #6  
Old December 14th, 2004, 08:31 AM
hochung hochung is offline
Ho Chung
W6HC
 
Join Date: Sep 2003
Location: Rancho Palos Verdes, CA
Posts: 2,006
you can get them from us here. i just haven't posted them in the LR genuine parts page cuz i have been slacking.

the pins... i think ground is 1 or 5... i am pretty sure it's 5. gotta take a look. whichever is black.

call me and i'll walk you thru it.

(310) 618-1875
____________________
Ho Chung

Reply With Quote
  #7  
Old December 14th, 2004, 09:43 AM
traveltoad traveltoad is offline
Aaron Shrier
KI6BCA
 
Join Date: Dec 2003
Location: San Fernando Valley
Posts: 2,628
#1 is correct. #3 I think is for the switch. #4 is to light the LED when the switch is on (I think)

Does anyone know which pin lights the backlight? You know... the one that comes on with the dash lights.
Reply With Quote
  #8  
Old December 14th, 2004, 09:53 AM
hochung hochung is offline
Ho Chung
W6HC
 
Join Date: Sep 2003
Location: Rancho Palos Verdes, CA
Posts: 2,006
#1 is ground then.
#3 is rarely used.
#2 and 5 are backlight and LED. this is where i get confused.
and #4 is for the switch to close it's circuit.
____________________
Ho Chung

Reply With Quote
  #9  
Old December 14th, 2004, 01:26 PM
traveltoad traveltoad is offline
Aaron Shrier
KI6BCA
 
Join Date: Dec 2003
Location: San Fernando Valley
Posts: 2,628
You cheated!!!! You pulled a switch out to check!!!
Reply With Quote
  #10  
Old December 14th, 2004, 02:46 PM
Snwbord24
 
Posts: n/a
Keep the info coming. I should be receiving my package from you guys with the connector and pins today and wiring my Hella's on Friday or Sat. I would love to know what to wire where. Not that I don't love talking to you Ho, but it'd be easier to write it down from here and have it out there with me.

I should probably get off my ass and lay all the wires out soon so the install goes smoothly.
Reply With Quote
  #11  
Old December 14th, 2004, 04:29 PM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
Ho,

Is there a land rover part number? I am going down to the dealership tomorrow and would love to wire up my switch on Thursday. If I order from you guys, I won't have them in time for our trip to the mountains this weekend. :-)

Thanks,
--Craig
Reply With Quote
  #12  
Old December 14th, 2004, 04:32 PM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
Quote:
Originally Posted by hochung
#1 is ground then.
#3 is rarely used.
#2 and 5 are backlight and LED. this is where i get confused.
and #4 is for the switch to close it's circuit.

#1 Ground
#2 Backlight 12v (hot when headlights are hot?)
#3 Rarely used for what? (switch 12v in?)
#4 Switch 12v out?
#5 LED 12v = always available power source?

Where is the 12v in for the switch?
Reply With Quote
  #13  
Old December 14th, 2004, 11:47 PM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
From a discoweb thread:

1 - power to switch - tap into running light (parking light)
2 - power to illuminating light - high beam
3 - empty
4 - goes to relay / device
5 - ground

My interpretation of this is:

1 - lights the switch - hook up to running/parking/corner light
2 - toggles the switch - hook up to high beam for driving lights, low beam for fogs, or accessory for other devices (accessory is always on)
3 - empty
4 - relay - sends 12v signal to relay when the switch is "on"
5 - ground - if you don't know what to do with this, then get someone else to wire it for you.

--Craig
Reply With Quote
  #14  
Old December 16th, 2004, 10:06 PM
Snwbord24
 
Posts: n/a
#1 12V power in
#2 No clue
#3 No clue
#4 Out to Hella Relay
#5 LED (I think)

Not sure about the LED being #5, it might be #2. Shit, and I just did this today, either way the LED comes on when the switch is depressed. I couldn't figure out how to get the backlight to work either. I tried all kinds of shit and couldn't get it to work. Anyway, I have hot going to #1 when the headlights are on (high or low beam) and #4 going to the Hella relay. I checked with an ohm meter and got a resistance reading between those two only when the switch was depressed so it made sense.

Hey John or Ho, do you guys have the Aux light switch in black vice charcoal or whatever color it is. My interior is black and that switch just looks like ass to me because it's not the same color. I really want to swap the fascia or whatever it's called with a black one.
Reply With Quote
  #15  
Old December 17th, 2004, 11:08 AM
johnlee johnlee is online now
John Lee
K6YJ
 
Join Date: Sep 2003
Location: Torrance, CA
Posts: 16,150
I just ordered the black switches. They should be in stock soon.

Frankly, I didn't even realize the 03's and 04's were different. They definitely are.
Reply With Quote
  #16  
Old December 17th, 2004, 03:38 PM
Snwbord24
 
Posts: n/a
definately put me down for one when they get in. Thanks.
Reply With Quote
  #17  
Old January 6th, 2005, 10:32 PM
craig craig is offline
Craig Miller
K7NAV
 
Join Date: Sep 2004
Location: Mount Vernon, WA
Posts: 33
Quote:
Originally Posted by Snwbord24
#1 12V power in
#2 No clue
#3 No clue
#4 Out to Hella Relay
#5 LED (I think)

Not sure about the LED being #5, it might be #2. Shit, and I just did this today, either way the LED comes on when the switch is depressed.

I only need 1 and 4 for my application. I put a blank cover over the cruise control switch. I have an a computer that turns on/off with the ignition key and none of the existing icons seemed to make any sense. I am going to put this switch inline so I can turn the computer off/on when the ignition is on.

I'll have to figure out the backlighting, LED on, etc in a couple of weeks when I hook up my second set of lights though. I'll try and remember to write down what I figure out and post it here.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
In-Dash Navigation Options For Defender johnlee Technical Discussions 239 May 11th, 2009 09:19 AM
04 T-case Swap & diff lock lamp switch Sam C. Technical Discussions 1 February 18th, 2008 06:25 AM
Wiring Hella 4000 Fogs to factory 2004 DII Switch ronward Technical Discussions 5 January 4th, 2007 04:16 AM
Wiring aux. lights stu454 Technical Discussions 4 June 24th, 2005 10:50 AM
Aux lighting for the Black Panther Snwbord24 Technical Discussions 35 September 9th, 2004 03:06 PM


All times are GMT -8. The time now is 05:02 PM.




Copyright 2001-2012 Expedition Exchange Incorporated. All rights reserved.
Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.