Land Rover Genuine Parts Worklamp (RTC8921AA) $115

Make working behind your vehicle easier and backing up your vehicle safer by fitting a Worklamp to your vehicle's Safety Devices Roof Rack. This is the same Worklamp used by Land Rover's Special Vehicles division on vehicles like the Camel Trophy vehicles, the G4 Challenge vehicles, and as well as many others. A steel mesh grill protects the lens from light impacts. Comes with mounting bracket and wiring harness. A ball-and-socket mounting arrangement provides for infinite adjustments.

Land Rover Genuine Parts Steel Wheel Chock (ANR5449) $11

The Steel Wheel Chock is small and light enough that you can always have proper wheel chocks handy with your vehicle's other tools. This wheel chock is standard fitment on LR3's, but there is no reason why all Land Rover drivers should not enjoy its virtues. The unit folds flat to optimize the device for storage, and expands for actual use. Keep at least two wheel chocks in your vehicle at all times.

Land Rover Genuine Parts Road Hazard Triangle (KCC500021) $48

Increase safety whenever you're broken down on the side of the road by putting the Road Hazard Triangle 100 meters behind your vehicle to give a heads up to other drivers. The triangle is made from polymer, and features highly reflective panels along the triangle's perimeter for night operation and a bright orange-colored triangle within the triangle body for day operation. Four legs splay open and closed and lock in the open position to prevent tipping over from vehicles driving past. The triangle folds neatly into a very small area and a handy storage case is provided, so there's no reason not to keep one or even two inside your vehicle at all times.

Land Rover Genuine Parts 1 KG Fire Extinguisher (STC8529AA) $275

Increase safety in and around your vehicle by always having a fire extinguisher handy. The Land Rover Genuine Parts 1 KG Fire Extinguisher is designed be hard mounted inside your vehicle and always at the ready for extinguishing A, B, C, and electrical fires. Safe to use on live electrical equipment, the 1 KG Fire Extinguisher is designed for extinguishing all types of fires except metal fires and gaseous fires having an explosion risk. A simple and intuitive two-step process operates the extinguisher. A gauge at the top of the unit displays the status of the unit and indication of when the unit has to be recharged. Mounting bracket, hardware, and instructions included.

Land Rover Genuine Parts Expedition Shovel (RTC9659) $60

The Expedition Shovel has several features that make it ideal for digging out stuck vehicles. The T-shaped handle allows pushing the shovel into the ground by hand. The shallow and wide spade shape reach under mired vehicles, and the ash handle is fully reinforced against breakage. Also very suitable for use as a utility shovel around camp.

Land Rover Genuine Parts JATE Ring (RRC3237) $95

Replace your factory lashing rings with heavy-duty JATE Rings. JATE Rings were designed for airlifting military Land Rovers, but also make excellent recovery points for your Land Rover. The standard JATE Ring is 85mm wide. Mounting hardware included.

Land Rover Genuine Parts Wide JATE Ring (ZXC9435) $95

The Wide JATE Ring identical to the standard JATE Ring, except that each side is relieved 6mm to give clearance for receiver hitch brackets and steering guards. The Wide JATE Ring spans 97mm. Mounting hardware included.

Land Rover Genuine Parts Disco2 Tie-Down Loop (EOZ100000) $8

The Disco2 Tie-Down Loop is standard fitment on the Disco2 and numerous Land Rover Special Vehicles, but is suitable for use on all Rover vehicles. The Disco2 Tie-Down Loop can also be partially hidden under carpet, with only the D-ring showing above the carpet for a clean appearance. The D-ring is hinged and is free to swing a full 180 degrees. Mounting bolts not included.

Land Rover Genuine Parts Rubberized Spring Isolator (ANR2938) $14

The Rubberized Spring Isolator is factory fitted to the tops of the rear springs of several Land Rover vehicles and is designed to minimize the transmission of road, suspension, and drivetrain vibration and noise to the vehicle's cabin. This isolator can also be used as a spring shim to level out a listing vehicle, or even to raise a vehicle. Unlike the Old Man Emu 10mm Trim Packer (which can be mounted safely only to the tops of the rear springs), this isolator can be fitted front or rear, top or bottom. You can even mount eight different isolators to all four of your springs for additional lift and/or additional vibration and noise attenuation.

Land Rover Genuine Parts Rubberized Shock Tower Securing Ring (RBC100111) $29

If you drive a Defender, Discovery Series I, or coilsprung Range Rover Classic, replace your sheet metal shock tower retaining ring with this rubberized version that is factory fitted to Discovery Series II's. The bolt pattern and diameter are identical, and this unit will fit the Defender, Discovery Series I, and coilsprung Range Rover Classics without modification to the vehicle. The entire unit is covered in rubber and attenuates the transmission of road, suspension, and drivetrain vibration and noise to the vehicle's cabin. Mounting hardware included. (Shown with Old Man Emu Heavy-Duty Spring which is sold separately.)

Land Rover Genuine Parts Spring Seat (NRC9700) $18

The factory air suspension is a liability on any offroad vehicle. We opine that all serious fourwheelers should replace their air suspension with Old Man Emu Springs for additional clearance and enhanced reliability. These Spring Seats fit between the coil springs and axle and hold your coil springs in place. This Spring Seat fits the front and rear springs on Range Rover Classics, Discovery Series I's, and Defender 90's, as well as the front of the Defender 110. Disco2's require a different Spring Seat.

Land Rover Genuine Parts Spring Seat (ANR3578) $15

The factory air suspension is a liability on any offroad vehicle. We opine that all serious fourwheelers should replace their air suspension with Old Man Emu Springs for additional clearance and enhanced reliability. These Spring Seats fit between the coil springs and axle and hold your coil springs in place. This Spring Seat fits the rear springs on the Disco2.

Land Rover Genuine Parts Magnetic Drain Plug (FTC5208) $7

Replace your standard drain plugs with the Magnetic Drain Plug. The Magnetic Drain Plugs come standard on the Disco2, but also fit the front and rear differentials on Land Rover vehicles with solid axles such as the Defenders, Disco1, and Range Rover Classic. A powerful magnet on the tip collects metal particles inside the axle and prevents these particles from causing additional wear to the differential, gears, and bearings contained within the axle. More importantly, the presence or absence of metallic particles on the drain plug at service time gives visible indication of possible problems with the drivetrain components.

Land Rover Genuine Parts Steel Wheel Lug Nut (RRD500010) $2.50

We opine that the Genuine Parts steel wheels are the only ones worth fitting to your vehicle. If you buy Genuine Parts steel wheels, they deserve Genuine Parts lug nuts. Each lug nut sold individually. This lug nut fits the wheel studs on the Defenders, Discovery Series I, and Range Rover Classic.

Land Rover Genuine Parts 20-Pack Steel Wheel Lug Nuts (20xRRD500010) $40

Buy the Steel Wheel Lug Nuts in packs of 20x and save $10 off the standard price. These lug nuts fit the wheel studs on the Defenders, Discovery Series I, and Range Rover Classic.

Land Rover Genuine Parts Land Rover 90 Decal (MTC8305) $12

Replace the unsightly raised "LAND ROVER" letters fitted to NAS Defender 90's with the Land Rover 90 Decal. This decal was fitted to the front grills of early Defenders, but is equally suitable for fitment to NAS Defender 90's. The decal is a matte black background over a silver base. (John's front grill is dented; the dent is not in the decal itself.)

Land Rover Genuine Parts Land Rover 110 Decal (MUC2003) $15

Replace the unsightly "DEFENDER" decal fitted to NAS Defender 110's with the Land Rover 110 Decal. This decal was fitted to the front grills of early Defenders, but is equally suitable for fitment to NAS Defender 110's. The Land Rover 110 decal is identical to the Land Rover 90 Decal, but says "110" instead of "90".

Land Rover Genuine Parts 1993-1995 Defender Headlight Switch (PRC3430) $60

This three-position switch controls your running lights and low beams, and came standard on your 1993-1995 NAS Defender. This switch has a tendency to burn out because of the lack of a relay in the headlights' wiring scheme.

Land Rover Genuine Parts 1997 Defender Headlight Switch (AMR6104) $127

This three-position switch controls your running lights and low beams, and came standard on your 1997 NAS Defender. This switch has a tendency to burn out because of the lack of a relay in the headlights' wiring scheme.

Land Rover Genuine Parts Defender Rear Fog Light Switch (PRC3432) $90

This two-position switch was standard fitment on many foreign Defenders for controlling the rear fog lights fitted to these vehicles. The icon on this switch matches the rear fog light icon on the North American Specification Defender's display and is very suitable for controlling an auxiliary rear worklamp or back-up light. This switch fits perfectly into the factory cut-out in your North American Specification Defender's steering column and mounts to the factory cutout in the steering column's steel frame. The Rear Fog Switch gives a very factory appearance to your auxiliary wiring controls.

Land Rover Genuine Parts Defender 110 Dome Light Switch (PRC7371) $30

This three-position switch was standard fitment on all North American Specification Defender 110's for controlling the interior dome light. This switch, however, is equally suitable for controlling your Hella Auxiliary Lights or ARB Air Lockers. These switches fit perfectly into the factory cutouts in your Defender's dash and give a very factory appearance to your auxiliary wiring setup

Land Rover Genuine Parts Range Rover Classic Headlight Switch (PRC5425) $70

This headlight switch has so many more uses than illuminating the headlights on a Range Rover Classic. If you own a Defender, these switches are perfect for controlling your Hella Auxiliary Lights or ARB Air Lockers. These switches fit perfectly into the factory cut-outs in your Defender's dash and give a very factory appearance to your auxiliary wiring set-up.

Land Rover Genuine Parts Defender Hand Throttle (NRC7791) $130

Control your vehicle's revs during winching or rockcrawling with this Hand Throttle. This item is fitted to many older Defenders and was not intended by the factory to be used as hand throttle. Nevertheless, it is very suitable to being used as such. The Hand Throttle mounts to the factory brackets inside the steering column and provides a very factory appearance.

Land Rover Genuine Parts Discovery Tethered Fuel Filler Cap (ESR2872) $28

If you own a Defender, then you have probably lost your fuel filler cap at least once. This Tethered Fuel Filler Cap is standard fitment on the Discovery and is an elegant solution to the problem of losing fuel filler caps. The tether also permits the cap to hang freely while refueling your vehicle and there is no need to place the cap on the wheel carrier or elsewhere. Not only is losing the cap eliminated but refueling is also much considerably easier. (Stainless steel mounting screw shown in photo is not included.)

Land Rover Genuine Parts 2004 Disco2 Center Differential Lock Kit (EW21) $700

The 2004 Disco2 is the only Disco2 that comes from the factory with a CDL shifter, and what an effective and smooth mechanism it is. We have heretofore advocated the fitment of a Disco1's CDL shifter as the most elegant and quasi-factory method to lock the Disco2's transfer box. However, we now opine that the 2004 Disco2's CDL shifter is a far superior method and is really the only way to fly. The cable-actuated 2004 CDL shifter is noticeably smoother in operation than the hard linkages employed on the Disco1 CDL shifter and the lack of hard linkages noticeably attenuates drivetrain noise and vibration inside the vehicle. Our CDL Kit is composed of all Land Rover Genuine Parts and contains everything one needs to lock one's CDL-ready transfer box, including the shifter knob, 2004 CDL shifter body, cables, fasteners, and other appurtenances. (Not included is the 2004 CDL placard, as this part is not available separately through Land Rover parts channels.) If your transfer box is not CDL-ready, i.e., not readily lockable, our CDL Kit is not suitable for you. Rather, our CDL Kit is for the Disco2 that already has a readily lockable transfer box but lacks the means to lock it.

Land Rover Genuine Parts Convex Left-Hand Mirror (CRD100650A) $40

Increase your view of the road and vehicles around your Disco1 or Disco2 with the Convex Left-Hand Mirror. This mirror is standard fitment to right-hand drive Discoveries and has a convex shape to give a wide-angle view of the sides and road behind your Disco. The Convex Mirror is a simple, drop-in replacement for the factory mirror on both the Disco1 and Disco2 (both vehicles use the identical mirrors). Installation is very simple and no vehicle butchery is required to install the mirror. All heating functions remain active. The Convex Left-Hand Mirror is similar in concept to the Expeditionware Convex Mirror for the Defender, but is a Land Rover Genuine Part for right-hand drive Discoveries.

Land Rover Genuine Parts G4 Challenge Decal Set (HLD501084EMC) $20

The G4 Challenge Decal Set includes two of the decals shown. Each G4 Challenge decal measures 6" x 3" in size.

Land Rover Genuine Parts Land Rover Special Vehicles Decal (STC7053) $15

The Land Rover Special Vehicles Decal measures 7.5" wide x 4" tall.

Land Rover Genuine Parts & SilBlade Discovery Series II Front Wiper Kit (EW19) $100

We have assembled this kit for Disco2 owners who wish to have standard, non-proprietary wiper blades to facilitate finding replacements in the future or far away from home. The wiper arms are Land Rover Genuine Parts for the Disco1 and fit perfectly on the Disco2. The EW19 includes both front wiper arms and two SilBlade 18" FlexBlade Silicone Wiper Blades.

Land Rover Genuine Parts Discovery Rear Ladder (STC50134) $200

If you have a Safety Devices Roof Rack on your Discovery, you need a ladder to access the roof rack. This ladder fits both the Discovery Series I and Discovery Series II. All hardware and ancillaries required for a proper installation are included with the ladder.

Land Rover Genuine Parts G4 Challenge Rear Upper Lamp Guard Set (STC53194) $125

These plastic Lamp Guards are fitted to the Land Rover G4 Challenge Discoveries, and protect the upper tail lamps on all model years of the Disco2. These are especially attractive on the 2003 and 2004 model years of the Disco2, as these vehicles come standard with flat and featureless tail lamps.

Land Rover Genuine Parts Cargo Door Handle Kit (EW31) $100

This cargo door handle is fitted to the seven-seat Disco2, but is very usable in all Disco2's. All fasteners and mounting brackets required for a proper installation are included in the kit. Black color to suit 2003-2004 Disco2's.

Land Rover Genuine Parts Discovery Bahama Beige Cupholder Set (STC53156SUC) $60

Make everything from international expeditions to your daily commute more enjoyable with this Cupholder Set. Unlike the flimsy cupholder that emanates from the dash, these cupholders bolt solidly to your vehicle's center console and will also securely hold liquid containers larger than a can of soda. Simply pull out the liner to enlarge the cupholder. These cupholders fit all model years of the Discovery and the 1995 model year of the Range Rover Classic. Bahama Beige color. Sold in pairs. Instructions and mounting fasteners included.

Land Rover Genuine Parts Discovery Dark Smokestone Cupholder Set (STC53156LPW) $60

Make everything from international expeditions to your daily commute more enjoyable with this Cupholder Set. Unlike the flimsy cupholder that emanates from the dash, these cupholders bolt solidly to your vehicle's center console and will also securely hold liquid containers larger than a can of soda. Simply pull out the liner to enlarge the cupholder. These cupholders fit all model years of the Discovery and the 1995 model year of the Range Rover Classic. Dark Smokestone color. Sold in pairs. Instructions and mounting fasteners included.

Land Rover Genuine Parts Discovery Series II Rubber Floor Mat Set (STC50048) $180

Protect your Disco2's carpeting with the Land Rover Genuine Parts Discovery Series II Rubber Floor Mat Set. The STC50048 set includes both the STC50049 front mats, as well as the rear mats. In other words, this set includes all four mats to cover all four foot wells in the Disco2. The thick rubber mats prevent soiling of the carpeting and also attenuate road noise and vibration. Black color.

Land Rover Genuine Parts Discovery Series I Front Fog Switch (AMR4138) $22

If you have auxiliary lights on your Disco1, you need switches to control them. Forego fitting toggle switches all over your dash simply by fitting this click-on, click-off switch to your Disco1's binnacle area or dash. This two-position switch can be wired to run independently of the vehicle's ignition and also gives visible indication that the switch stays depressed and illuminates. Ash Grey color.

Land Rover Genuine Parts Discovery Series I Rear Fog Switch (AMR3751) $22

If you have auxiliary lights on your Disco1, you need switches to control them. Forego fitting toggle switches all over your dash simply by fitting this click-on, click-off switch to your Disco1's binnacle area or dash. This two-position switch can be wired to run independently of the vehicle's ignition and also gives visible indication that the switch stays depressed and illuminates. Ash Grey color.

Land Rover Genuine Parts Discovery Series I Three-Switch Carrier (AWR3330LNF) $22

Increase your vehicle's capacity to house auxiliary switches with the Three-Switch Carrier. This unit fits to the dash of the Disco1 and Disco2, and replaces either the factory two-switch carrier or the factory ashtray on both vehicles. The Three-Switch Carrier is compatible only with the Disco1 Rear Fog and Disco1 Front Fog Switches only, and not the Disco2 switches. Ash Grey color to suit interiors of Disco1's and pre-2003 Disco2's.

Land Rover Genuine Parts Discovery Series II Auxiliary Light Switch (STC50098) $15

If you have auxiliary lights on your Disco2, you need switches to control them. Forego fitting toggle switches all over your dash simply by fitting this momentary switch to your Disco2's binnacle area. Unlike the factory fog light switch fitted to the binnacle, this momentary switch can be wired to run independently of the vehicle's ignition. Like the Cruise Control Switch, this switch can be wired to illuminate when depressed. This switch will fit the left-hand side of the Disco2's binnacle. Ash Grey color to suit pre-2003 Disco2's.

Land Rover Genuine Parts Discovery Series II Auxiliary Light Switch (VVN500060) $65

If you have auxiliary lights on your Disco2, you need switches to control them. Forego fitting toggle switches all over your dash simply by fitting this momentary switch to your Disco2's binnacle area. Unlike the factory fog light switch fitted to the binnacle, this momentary switch can be wired to run independently of the vehicle's ignition. Like the Cruise Control Switch, this switch can be wired to illuminate when depressed. This switch will fit the left-hand side of the Disco2's binnacle. Black color to suit 2003-2004 Disco2's.

Land Rover Genuine Parts Discovery Series II Auxiliary Light Switch (VVN500070) $65

If you have auxiliary lights on your Disco2, you need switches to control them. Forego fitting toggle switches all over your dash simply by fitting this momentary switch to your Disco2's binnacle area. Unlike the factory fog light switch fitted to the binnacle, this momentary switch can be wired to run independently of the vehicle's ignition. Like the Cruise Control Switch, this switch can be wired to illuminate when depressed. This switch will fit the right-hand side of the Disco2's binnacle. Black color to suit 2003-2004 Disco2's.

Land Rover Genuine Parts Discovery Series II Cruise Control Switch (YUH100370) $27

If you have auxiliary lights on your Disco2, you need switches to control them. Forego fitting toggle switches all over your dash simply by fitting this click-on, click-off switch to your Disco2's binnacle area. Unlike the factory fog light switch fitted to the binnacle, this two-position switch can be wired to run independently of the vehicle's ignition and also gives visible indication that the switch is depressed. Unlike the Rear Wiper Switch, the Cruise Control Switch can be wired to illuminate when depressed. Ash Grey color to suit pre-2003 Disco2's.

Land Rover Genuine Parts Steel Wheel Lug Nut (Disco2/P38) (ANR4851) $4

We opine that the Genuine Parts steel wheels are the only ones worth fitting to your vehicle. If you buy Genuine Parts steel wheels, they deserve Genuine Parts lug nuts. Each lug nut sold individually. This lug nut fits the wheel studs on the Discovery Series II and P38 Range Rovers, and its unique flange is designed to retain the Hub Cap, shown below.

Land Rover Genuine Parts Hub Cap (DTC100810) $20

When fitted with steel wheels, the Discovery Series II's hubs are both unsightly and exposed to the elements. Solve both problems by fitting the Hub Cap to your steel wheels. The Hub Cap securely clips in place and mimics the appearance of the drive flanges on earlier model Land Rovers. (Pictured with ANR5829 Steel Wheel, which is sold separately.) Requires the ANR4851 Steel Wheel Lug Nuts, which are sold separately.

Land Rover Genuine Parts LR3 Winch Assembly (VUB501471) $2530

Add greater offroad capability to your LR3 with the Genuine Parts Winch Assembly. The winch and winch tray are recessed into the LR3's front bumper, making for a very integrated and factory appearance with good approach angles. This kit includes a winch tray, WARN 9.5 XP winch, and all of the necessary power feeds. A template for cutting the front bumper and trim pieces are included. Every vehicle that is taken offroad should be fitted with a winch. The Genuine Parts Winch Assembly gives the LR3 winching ability while maintaining a factory appearance.

Land Rover Genuine Parts LR3 G4 Challenge Rear Ladder (AGP780020) $330

This Rear Ladder is fitted to the Land Rover G4 Challenge LR3s, and provides access to the Land Rover LR3's roof. The Rear Ladder also breaks up the flat and featureless tail section of the LR3. All hardware and instructions required for a proper installation are included with the ladder.

Land Rover Genuine Parts LR3 G4 Challenge Front Lamp Guards (VUB501200) $240

These plastic Lamp Guards are fitted to the Land Rover G4 Challenge LR3s, and protect the headlamps of all Land Rover LR3s.

Land Rover Genuine Parts LR3 G4 Challenge Rear Lamp Guards (VUB501380) $240

These plastic Lamp Guards are fitted to the Land Rover G4 Challenge LR3s, and protect the upper tail lamps of all Land Rover LR3s.

Land Rover Genuine Parts LR3 Rubber Navigation Mat (FAH500032PVJ) $22

The Land Rover LR3 comes from the factory with a tray below the navigation screen, but anything placed on the tray easily slides off. Prevent this problem by fitting the Land Rover Genuine Parts LR3 Rubber Navigation Mat. The Rubber Navigation Mat is sticky by nature and adheres to the smooth tray. The Rubber Navigation Mat features truncated rubber pyramids that grab small personal effects placed on it and prevents them sliding off during normal driving. Make your LR3 much more usable during daily driving with the Rubber Navigation Mat.

Land Rover Genuine Parts LR3 Reduced Cupholder Insert (FWW500060PVJ) $10

The LR3 comes from the factory with cupholders, but the cupholders are too large. These large cupholders are designed to hold very large drinks, which is fine. However, the cupholders do not secure regular sized drinks like cans of soda. The cans flop around inside the cupholders and spill easily. Solve this problem easily by fitting the Land Rover Genuine Parts LR3 Reduced Cupholder Insert in place of the factory insert. The Reduced Cupholder Insert reduces the inner diameter of the cupholder to usable size. Sold individually.