 |
Rasta 4x4 LR3 Lower Door Guards (DOORS) $500 The Rasta 4x4 LR3 Lower Door Guards are pressed from thick aluminum and protect the door sills from impact and scraping damage. Unlike many rock sliders, the LR3 Lower Door Guards have a very factory appearance. Installation is straightforward and all fasteners required for installation are included. The LR3 Lower Door Guards are left in the white, but may be powdercoated by the user if desired to maintain a factory appearance. Installation Instructions For Rasta 4x4 LR3 Lower Door Guards |
The LR3 Lower Door Guards are pressed from thick aluminum and protect the door sills from impact and scraping damage.
Unlike many rock sliders, the LR3 Lower Door Guards have a very factory appearance.
The LR3 Lower Door Guards even mate with the LR3's gaskets.
Installation is straightforward and all fasteners required for installation are included. The LR3 Lower Door Guards are left in the white, but may be powdercoated by the user if desired to maintain a factory appearance.
The LR3 Radiator Guards protect the bottom edges of the LR3's radiator from impact and scraping damage.
The LR3 Radiator Guards are cast from thick aluminum for minimum weight and great strength.
In addition to protecting the underside of your LR3, you should protect the front of it as well. ARB Land Rover LR3 Winch Bar is an excellent choice. This airbag-compatible Winch Bar is designed specifically for the LR3, and accepts the factory bumper-mounted fog lights. This Winch Bar does not cover the factory front recovery point, which is retained, and replacement lower pans and covers are supplied with the Bar. Most important of all, this Winch Bar accommodates the Superwinch X9 Planetary Winch.
Early LR3s came from the factory with a tray below the navigation screen, but anything placed on the tray easily slides off.
Prevent this problem by fitting the Land Rover Genuine Parts LR3 Rubber Navigation Mat. The Rubber Navigation Mat is sticky by nature and adheres to the smooth tray.
The Rubber Navigation Mat features truncated rubber pyramids that grab small personal effects placed on it and prevents them sliding off during normal driving. Make your LR3 much more usable during daily driving with the Rubber Navigation Mat.
Early LR3s also came from the factory with cupholders, but the cupholders are too large. These large cupholders are designed to hold very large drinks, which is fine. However, the cupholders do not secure regular sized drinks like cans of soda. The cans flop around inside the cupholders and spill easily. Solve this problem easily by fitting the Land Rover Genuine Parts LR3 Reduced Cupholder Insert in place of the factory insert. The Reduced Cupholder Insert reduces the inner diameter of the cupholder to usable size.
If you want to dress up your LR3, the Land Rover Genuine Parts LR3 G4 Challenge Front Lamp Guards are available,
as are the Land Rover Genuine Parts LR3 G4 Challenge Rear Lamp Guards.
The Land Rover Genuine Parts LR3 G4 Challenge Rear Ladder is fitted to the Land Rover G4 Challenge LR3s, and provides access to the Land Rover LR3's roof. The Rear Ladder also breaks up the flat and featureless tail section of the LR3. All hardware and instructions required for a proper installation are included with the ladder.
The rear of the LR3 seems to be the weakest in terms of styling. The rear ladder makes the LR3's rear much more interesting and palatable.
The SilBlade 22" FlexBlade Silicone Wiper Blade for LR3 is a direct, drop-in replacement for the front factory wiper blades on the Land Rover LR3. Because of the frameless design, the FlexBlades provide all-weather performance far beyond the factory wiper blades.