Snow Peak: Outdoor Lifestyle Creator since 1958

 

 

 

Snow Peak White Mini Hozuki Lantern (ES-040WH)

Snow Peak White Mini Hozuki Lantern (ES-040WH) $40

Quantity Add to cart

The Snow Peak Mini Hozuki is an improvement on the original Hozuki. The Mini Hozuki is smaller and emits a warm color rather than the bluish and clinical color of most LEDs. The translucent silicone hood and warm color output combine to make the Mini Hozuki very easy on the eyes. Choose among three light levels on standard mode. The Mini Hozuki also operates in candle mode in both low and high outputs, where the LED mimics the flickering light from a candle. All of this is controlled by a single switch. The silicone loop features a magnetic ball on the end for hanging the Mini Hozuki from just about anywhere. The Mini Hozuki is very efficient and will operate for 40 hours on high output and 70 hours on low output. A low-battery indicator will flicker when the batteries are low and require replacement. Three AAA batteries are included.

Snow Peak SnowMiner Headlamp (ES-020) $50

Quantity Add to cart

The Snow Peak SnowMiner Headlamp is a full-function headlamp that easily transforms into a true lantern with ambient lighting. In headlamp mode, the SnowMiner features high (80 lumens for 55 hours), low (eight lumens for 140 hours), strobe (200 hours), and variable (high to two lumens) settings. In headlamp mode with the silicone hood pressed inward toward the lamp body, the light emitted is focused forward. The SnowMiner can easily be switched to lantern mode by pulling the silicone hood away from the unit's body with the fingertips. This change in the hood shape emits light in a pattern spanning a full 180 degrees. The headband features a hook in one of the adjustment buckles so that the SnowMiner can be worn on the head or hung. A small red light warns that your batteries are low. 3 AAA Batteries are included. 65g (without batteries).

Snow Peak Snow Peak Mini Flame Nocturne Lantern (GL-140-US)

Snow Peak Snow Peak Mini Flame Nocturne Lantern (GL-140-US) $40

Quantity Add to cart

If you get no love from the vast majority of cold, bluish LED lanterns out there, the Snow Peak Mini Flame Nocturne is for you. The Mini Flame is easily lit with a lighter or match and the flame is an actual flame that burns a warm yellow-white and flickers in the breeze. The flame is adjustable. This isn't a white-hot gas lantern that hisses and requires globes. Rather, it is more like a gas-powered candle that is silent and an ideal way to burn up the remainders of your old fuel canisters while creating an evening of ambience. A key feature that distinguishes the Mini Flame Nocturne from many other lanterns is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS PowerGas, and numerous other systems. Burn time is approximately 11 hours on a 110g fuel canister and 35 hours on a standard 250g fuel canister. Comes standard with white transport case. 110g.

 

Snow Peak Titanium Short Spork (SCT-006)

Snow Peak Titanium Short Spork (SCT-006) $9

Quantity Add to cart

The Snow Peak Titanium Short Spork is an ultra-lightweight hybrid tool that can be used as a spoon or fork, and the curved edge can also be used to cut softer items. The Titanium Short Spork is the same length as the disassembled Carry-On Chopsticks and fits into the Carry-On Chopsticks' nylon carry case to minimize wasted storage space and to ensure the Titanium Short Spork always stays with the Carry-On Chopsticks. The Titanium Short Spork represents a double weight reduction, as titanium is substantially lighter than stainless steel, and one need carry only one utensil rather than two or three. More important than weight is titanium's suitability for utensils. Titanium has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. 15g weight. (Shown for illustration purposes with Snow Peak Solo Cutting Board, which is sold separately.)

Snow Peak Titanium Spork

Snow Peak Titanium Spork (SCT-004) $10

Quantity Add to cart

The Snow Peak Titanium Spork is an ultra-lightweight hybrid tool that can be used as a spoon or fork, and the curved edge can also be used to cut softer items. The Titanium Spork represents a double weight reduction, as titanium is substantially lighter than stainless steel, and one need carry only one utensil rather than two or three. More important than weight is titanium's suitability for utensil construction. Titanium has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. If you like, the Titanium Spork will fit into the nylon carry case of the Snow Peak Three-Piece Titanium Silverware Set. 16g weight.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

Snow Peak Three-Piece Titanium Silverware Set (SCT-001) $35

Quantity Add to cart

The Snow Peak Three-Piece Silverware Set includes a knife, fork, and spoon constructed from titanium. Titanium is substantially lighter than stainless steel. More important than weight is titanium's suitability for utensil construction. Titanium no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Nylon carry case included. 52g weight.

Snow Peak Carry-on Chopsticks L (SCT-111)

Snow Peak Carry-on Chopsticks L (SCT-111) $40

Quantity Add to cart

The Snow Peak Carry-on Chopsticks L are the "large" size chopsticks and measure 9" in length when assembled. The chopsticks disassemble like miniature pool cues, and the wooden tips nest inside the handles for easy transport and compact storage. The tips are constructed from bamboo while the handles are made of stainless steel. The assembly hardware is solid brass. When disassembled, the chopsticks measure 5" long. The included red nylon carry case measures 5.5" long and includes a neck strap. 49g total weight for chopsticks and carry case.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

Snow Peak Titanium Double Wall Cup 450 (MG-053) $50

Quantity Add to cart

The Snow Peak Titanium Double Wall Cup 450 is an ultra-lightweight mug that provides superior heat and cold insulation due to its double-wall construction. Hot liquids stay hotter and cold drinks stay colder inside the Titanium Double Wall Cup 450. Furthermore, titanium has low thermal conductivity (so the heat from hot drinks will never reach the lip of the cup), no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and will not melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Folding titanium handles. 14 oz. capacity. 118g weight.

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053)  with Snow Peak Titanium Double Wall Cup 450 (MG-053)

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053) $6

Quantity Add to cart

The Snow Peak Lid for Titanium Double Wall Cup 450 is a plastic lid with a sealing gasket that fits onto the top of the Titanium Double Wall Cup 450 and transforms it into a travel mug. Fitment of the Lid both prevents spilling and adds further insulating properties to the already-efficient Double Wall Cup 450. A vent hole in the lid prevents gurgling and spillage. (Shown for illustration purposes with Snow Peak Titanium Double Wall Cup 450, which is sold separately.)

Snow Peak Trek Titanium Bowl (STW-003T)

Snow Peak Trek Titanium Bowl (STW-003T) $17

Quantity Add to cart

The Snow Peak Trek Titanium Bowl is an ultra-lightweight Bowl. Titanium has low thermal conductivity, no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and scratch-resistant (unlike aluminum), and will not melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Like almost all Snow Peak products, the Titanium Bowls stack within one another to minimize storage space. 5.5" diameter. 45g weight.

Snow Peak Trek Titanium Plate (STW-002T) with Snow Peak Titanium Double Wall Cup 450 and Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

Snow Peak Trek Titanium Plate (STW-002T) $17

Quantity Add to cart

The Snow Peak Trek Titanium Plate is an ultra-lightweight plate. Titanium has low thermal conductivity, no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and scratch-resistant (unlike aluminum), and will not melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. 7.5" diameter. 63g weight. (Shown for illustration purposes with Snow Peak Titanium Double Wall Cup 450 and Snow Peak Three-Piece Silverware Set, both of which are sold separately.)

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

Snow Peak Trek 900 Titanium Cafe Press (CS-111) $56

Quantity Add to cart

The Snow Peak Titanium Cafe Press is a lightweight and portable coffee press for use in the field. Titanium has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and scratch-resistant (unlike aluminum), and will not melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. The titanium handles fold for compact storage, yet allow comfortable handling while boiling. Using the Titanium Cafe Press is very simple; it works just like any other coffee press. Mesh nylon bag included. 200g weight.

Snow Peak Mini Solo Cook Set Titanium (SCS-004T)

Snow Peak Mini Solo Cook Set Titanium (SCS-004T) $66

Quantity Add to cart

The Snow Peak Mini Solo Cook Set Titanium is an ultra-lightweight, three-piece cookset comprised of a 28 oz. pot with lid and a 10 oz. cup. Snow Peak designed the Mini Solo Cook Set Titanium to be part of a greater whole, and stacking possibilities are many. Two GigaPower Fuel 110 canisters stack within the Mini Solo Cook Set. Alternatively, one GigaPower Fuel 110 and one GigaPower Stove with Auto Igniter stack within the Mini Solo Cook Set. The Titanium Double Wall Cup 450 and one Gigapower Stove with Auto Igniter stack within the Mini Solo Cook Set Titanium. A complete Mini Solo Cook Set Titanium with additional items stacked within it will stack into the Trek 900 Titanium Component Cooker. The Mini Solo Cook Set Titanium is constructed entirely of titanium, which has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong. Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Mesh nylon bag included. 155g weight.

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T)

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T) $53

Quantity Add to cart

The Snow Peak Trek 900 Titanium Component Cooker is an ultra-lightweight, two-piece cookset comprised of a 30 oz. pot and 8 oz. multipurpose lid/pan/bowl. Snow Peak designed the Trek 900 Titanium Component Cooker to be part of a greater whole, and stacking possibilities are many. One GigaPower Fuel 250 and one Titanium GigaPower Stove With Auto Igniter stack within the Trek 900 Titanium Component Cooker. A complete Mini Solo Cook Set Titanium with additional items stacked within it will stack within the Trek 900 Titanium Component Cooker, which in turn will stack within the Trek 1400 Titanium Component Cooker. The Trek 900 Titanium Component Cooker is constructed entirely of titanium, which has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong. Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Mesh nylon bag included. 175g weight.

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T) $60

Quantity Add to cart

The Snow Peak Trek 1400 Titanium Component Cooker is an ultra-lightweight, two-piece cookset comprised of a 47 oz. pot and 17 oz. multipurpose lid/pan/bowl. The Trek 900 Titanium Component Cooker with additional items stacked within it will stack within the Trek 1400 Titanium Component Cooker. The Trek 1400 Component Cooker Titanium is constructed entirely of titanium, which has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong. Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Mesh nylon bag included. 210g weight.

Snow Peak Geoshield Stove (GS-360)

Snow Peak Geoshield Stove (GS-360) $100

Quantity Add to cart

The Snow Peak Geoshield Stove is the backpacking stove that thinks it's a tabletop stove. Its size and weight say backpacking, but it is equally suitable for tabletop use, and features built-in windscreens and heat shields to maximize heat reflectivity, minimize fuel consumption, and speed cooking times of large amounts of food. The Geoshield Stove is easily assembled and breaks down into small pieces for easy storage and transport. The Geoshield Stove has much more structure and is much more stable than other backpacking-sized stoves, so it is suitable for use with the larger pots and pans typically used for family camping. The Geoshield Stove offers two modes of gas use. The canister may be inverted for very hot fires, or the canister may be stood up for low-temperature cooking or simmering. For even greater fuel versatility, fit the Geoshield Stove with the various Kovea Adapters to run the Geoshield Stove on other types of common camp fuels. An igniter and two drawstring pouches are included. 392g weight. (Shown for illustration purposes with Snow Peak GigaPower Fuel 250, which is sold separately.)

snowpeak38 002_.jpg

Snow Peak GigaPower Fuel 250 (GP-250US) $6

Quantity Add to cart

Snow Peak GigaPower Fuel 250 contains an Isobutane/LPG fuel mixture in a compact canister. Snow Peak's testing has shown The GigaPower Fuel 250 will operate Snow Peak stoves in temperatures as low as 17 degrees F. GigaPower Fuel 250 canisters are equipped with self-sealing safety valves and employ the standard Lindal Valve threading for easy interchangeability with most common gas canisters from other manufacturers like the PRIMUS PowerGas systems. 370g full weight.

Snow Peak My Table (LV-034T)

Snow Peak My Table (LV-070RD) $130

Quantity Add to cart

The Snow Peak My Table is a folding camp table that weighs 4 lbs., measures 18" x 13" x 16" when open, and measures 17" x 13" x 3" folded. The My Table is constructed of aluminum, steel, and bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. The My Table locks in the open position and its design is such that the more weight is placed on the table, the more securely the My Table locks in the open position. The My Table is an ideal match, both dimensionally and aesthetically, with the Kermit Chair. Nylon carry case included.

Snow Peak Red Folding Chair (LV-070RD)

Snow Peak Red Folding Chair (LV-077RD) $90

Quantity Add to cart

The Snow Peak Red Folding Chair will be a comfortable favorite around your campfire and field kitchen for years to come. The cotton canvas is a beautiful cardinal color that looks great against the black die-cast joints and aluminum tubing. The Red Folding Chair quickly and easily folds for transport or storage, and measures 27" long x 23" wide x 4" tall when folded. When deployed for sitting, the Red Folding Chair measures 23" long (front to back) x 23" wide. The seat is 19" off the ground and the top of the backrest is 34" high. The top of the armrests is 25" off the ground, so the Red Folding Chair is ideal with the vast majority of tables. The armrests are covered in padded canvas and the seat is taut so that there is no pressure on the bottoms of the thighs. Perfect when paired with the Iron Grill Table and 660 legs.

Snow Peak Iron Grill Table Frame Short (CK-170)

Snow Peak Iron Grill Table Frame Short (CK-170) $140

Quantity Add to cart

The Snow Peak Iron Grill Table Frame Short is a configurable, backyard or field table system that permits the user to change his IGT from simple table to stove to grill to continuous length of multiple tables for large parties. As its name would suggest, the Iron Grill Table Short is a shorter variant of the three-unit IGT system and accommodates the placement of two (rather than three) IGT units. The legs for this frame are sold separately and are available in 26" (CK-113) and 33" (CK-114). The Iron Grill Table Frame Short measures 24" x 20" x 1".

Snow Peak Iron Grill Table Frame 830 Set (CK-147)

Snow Peak Iron Grill Table Frame 830 Set (CK-147) $210

Quantity Add to cart

The Snow Peak Iron Grill Table Frame 830 Set is a configurable, backyard or field table system that permits the user to change his IGT from simple table to stove to grill to continuous length of multiple tables for large parties. The component pieces break down into separate pieces for easy storage and transport. The Iron Grill Table accommodates the placement of three IGT units. The Iron Grill Table Frame 830 Set includes four, 32" legs for standing applications. A screw-in adjuster is installed in the bottom end of each leg to adjust for uneven ground. The Iron Grill Table frame measures 34" x 20" x 1". The legs measure 1" x 33" each and are shorter in length than the table to facilitate storage or transport.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

Snow Peak Iron Grill Table Storage Case (CK-100BR) $70

Quantity Add to cart

The Iron Grill Table Storage Case is an excellent way to store and transport IGT pieces. Construction is of heavy-duty canvas and all edges and seams are double-layered canvas to prevent them from fraying, unraveling, or pulling apart. The handles go all the way under the case to reinforce the bottom. Two additional handles on the sides facilitate loading and unloading the case from vehicles and also stabilize the case when it is carried on the shoulder like a huge purse. Included are five black nylon pouches to segregate the contents. The Engrish instructions let us know that the five nylon pouches are for:

  • A bag for unit W
  • A bag for unit S
  • A bag for wind screen
  • A bag for Stainless Tray 2 pcs
  • A bag for legs (up to 4 legs)

The Iron Grill Table Storage Case measures 38" x 23". A three-unit IGT frame measures 34" x 20" x 1". The Iron Grill Table Storage Case will easily hold the aforementioned IGT pieces and a three-unit IGT frame. The case is sized so that it will expand when you want to pack it with lots of IGT items, but it will still sit nice, flat, and snug without the contents sliding around too much.

Snow Peak Tote Bag Jumbo (UG-072R)

Snow Peak Tote Bag Jumbo (UG-072R) $75

Quantity Add to cart

The Tote Bag Jumbo is an excellent way to store and transport large amounts of IGT pieces as well as other large appurtenances like folding camp chairs. The Tote Bag Jumbo is similar to the Iron Grill Table Storage Case, but deeper front to back to accommodate more contents. The Tote Bag Jumbo measures 36" x 18" x 9". A three-unit IGT frame measures 34" x 20" x 1" and the IGT pieces stack very tightly, so the Tote Bag Jumbo will easily accommodate multiple three-unit IGT frames, sets of legs, IGT Multi Function Table Bamboo side extensions, and IGT inserts. Construction is of heavy-duty canvas and all edges and seams are double-layered canvas to prevent them from fraying, unraveling, or pulling apart. Accessory handles surround the Tote Bag Jumbo to facilitate handling and loading/unloading from vehicles. Contents are secured with two Fastex buckles and the main handles feature a surround to keep them tidy. A mesh accessory pocket is on the side for smaller items. (Shown for illustration purposes with the CK-147 Iron Grill Table Frame 830 Set and two Red Folding Chairs, which are sold separately.)

Snow Peak IGT 660 Leg Set (Short) (CK-113)

Snow Peak IGT 660 Leg Set (Short) (CK-113) $48

Quantity Add to cart

The Snow Peak IGT 660 Leg Set consists of two legs that measure 1" x 26". A screw-in adjuster is installed in the bottom end of each leg to adjust for uneven ground. These 26" legs are suitable for sitting applications. The three-unit Iron Grill Table Frames we sell come with the legs included, but we sell the legs separately as well because some users may want to convert their three-unit Iron Grill Table Frames from standing to sitting configuration. Or, they may require the legs because they want to add an IGT Multi Function Table Bamboo to their Iron Grill Table Frame. Or, they may own the two-unit IGT Table Frame Short, which comes without legs. Whatever the reason for wanting additional legs, the 26" legs are available separately as well. Two legs per set.

Snow Peak IGT 830 Leg Set (Tall) (CK-114)

Snow Peak IGT 830 Leg Set (Tall) (CK-114) $50

Quantity Add to cart

The Snow Peak IGT 830 Leg Set consists of two legs that measure 1" x 33". A screw-in adjuster is installed in the bottom end of each leg to adjust for uneven ground. These 33" legs are suitable for standing applications. The three-unit Iron Grill Table Frames we sell come with the legs included, but we sell the legs separately as well because some users may want to convert their three-unit Iron Grill Table Frames from sitting to standing configuration. Or, they may require the legs because they want to add an IGT Multi Function Table Bamboo to their Iron Grill Table Frame. Or, they may own the two-unit IGT Table Frame Short, which comes without legs. Whatever the reason for wanting additional legs, the 33" legs are available separately as well. Two legs per set.

Snow Peak IGT Height Adjuster (CK-151)

Snow Peak IGT Height Adjuster (CK-151) $40

Quantity Add to cart

The IGT Height Adjuster increases the versatility and modularity of your Iron Grill Table even further by allowing mounting of the CK-116T bamboo side extension at different heights. For example, you can set your IGT frame at 830/standing/counter height and your bamboo side extension at 660/sitting height so that your guests can sit and eat while you stand and service them.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

Snow Peak IGT Multi Function Table Bamboo (CK-116T) $170

Quantity Add to cart

The Snow Peak IGT Multi Function Table Bamboo hooks into any one of the four sides of the Iron Grill Table Frame and greatly increases the working or dining tabletop space. Mounting hooks are integral with the unit and all that is required to mount to an Iron Grill Table Frame are two legs (sold separately). One IGT Multi Function Table Bamboo will also hook onto another IGT Multi Function Table Bamboo. The IGT Multi Function Table Bamboo will fit Iron Grill Table Frames and IGT Multi Function Table Bamboos of any height, so be sure to order legs of the correct length when ordering your IGT Multi-Function Table Bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. Measures 34" x 20" x 1/2". (Shown for illustration purposes with Snow Peak Iron Grill Table Frame Set and Snow Peak IGT Leg Set, both of which are sold separately.)

Snow Peak IGT Wood Table S Bamboo (CK-125T)

Snow Peak IGT Wood Table S Bamboo (CK-125T) $33

Quantity Add to cart

The Snow Peak IGT Wood Table S Bamboo fills voids in unused areas of the Iron Grill Table with bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. The IGT Wood Table S Bamboo displaces one IGT unit and maximizes tabletop space for cooking implements and ingredients. The IGT Wood Table S Bamboo can also serve as a makeshift cutting board. (Shown for illustration purposes with Snow Peak three-unit Iron Grill Table Frame Set, which is sold separately.)

Snow Peak IGT Wood Table W Bamboo (CK-126T)

Snow Peak IGT Wood Table W Bamboo (CK-126T) $50

Quantity Add to cart

The Snow Peak IGT Wood Table W Bamboo fills voids in unused areas of the Iron Grill Table with bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. The IGT Wood Table W Bamboo displaces two IGT units and maximizes tabletop space for cooking implements and ingredients. The IGT Wood Table W Bamboo can also serve as a makeshift cutting board. (Shown for illustration purposes with Snow Peak three-unit Iron Grill Table Frame Set, which is sold separately.)

Snow Peak IGT Stainless Box Half Unit (CK-025)

Snow Peak IGT Stainless Box Half Unit (CK-025) $56

Quantity Add to cart

The IGT Stainless Box Half Unit is a stainless box that fits into your Iron Grill Table to provide both storage and a work surface. As its name would suggest, the CK-025 takes up one-half IGT spaces in your IGT frame. The detachable lid doubles as a stainless IGT tabletop insert. Construction is entirely of stainless steel and the Snow Peak logos are engraved into the lid and sides of the tray. Dimensions are 14" x 5" x 6".

Snow Peak IGT Stainless Box S Unit (CK-050

Snow Peak IGT Stainless Box S Unit (CK-050) $76

Quantity Add to cart

The IGT Stainless Box S is a stainless box that fits into your Iron Grill Table to provide both storage and a work surface. As its name would suggest, the CK-050 takes up one S unit or a single IGT space in your IGT frame. The detachable lid doubles as a stainless IGT tabletop insert. Construction is entirely of stainless steel and the Snow Peak logos are engraved into the lid and sides of the tray. Dimensions are 14" x 10" x 6".

 

now Peak IGT Stainless Half Unit Tray (CK-026)

Snow Peak IGT Stainless Half Unit Tray (CK-026) $20

Quantity Add to cart

The IGT Stainless Half Unit Tray inserts into your Iron Grill Table to fill unused portions of your frame, provide a work surface, or act as a non-flammable and non-staining heat buffer for very hot IGT items such as the BBQ Box. As its name would suggest, the IGT Stainless Half Unit Tray is constructed entirely of stainless steel and takes up one-half IGT spaces in your IGT frame. The IGT Stainless Half Unit Tray is identical to the lid included with the IGT Stainless Box Half Unit (CK-025). Dimensions are 14" x 5" x 0.5". (Shown for illustration purposes with the Iron Grill Table Frame, which is sold separately.)

Snow Peak IGT Stainless Single Unit Tray (CK-051)

Snow Peak IGT Stainless Single Unit Tray (CK-051) $33

Quantity Add to cart

The IGT Stainless Single Unit Tray inserts into your Iron Grill Table to fill unused portions of your frame, provide a work surface, or act as a non-flammable and non-staining heat buffer for very hot IGT items such as the BBQ Box. As its name would suggest, the IGT Stainless Single Unit Tray is constructed entirely of stainless steel and takes up one IGT unit space in your IGT frame. The IGT Stainless Single Unit Tray is identical to the lid included with the IGT Stainless Box S Unit (CK-050). Dimensions are 14" x 10" x 0.5".

Snow Peak Cutting Board Set L (CS-208) $56

Quantity Add to cart

The Cutting Board Set L provides a convenient cutting board for your Iron Grill Table system, as well as a safe and convenient way to transport a full-sized kitchen knife. When open, the raw wood cutting board drops into the Iron Grill Table frame and takes up one IGT unit. When closed, the wood acts as a case for the knife. The knife is held magnetically to the wood so that the knife will not accidentally drop out if the wood is opened at an awkward angle. The Santoku blade is stainless steel and 6.5" long, which is more than large enough for the vast majority of field cooking tasks. The wood also features four feet that enable the cutting board to be used on any tabletop or other flat surface.

Snow Peak IGT BBQ Box (CK-130)

Snow Peak IGT BBQ Box (CK-130) $180

Quantity Add to cart

The Snow Peak IGT BBQ Box may be used standalone or as part of the Iron Grill Table System. Made entirely of stainless steel, the IGT BBQ Box is easy to use, easy to clean, and durable. Fill the removable pan with charcoal and drop your favorite meal on top of the removable grate. Once the charcoal is lit, the charcoal pan can be raised or lowered with a lever to increase or decrease heat as desired. The IGT BBQ Box's legs stow inverted to minimize wasted storage space, and a nylon strap is provided to hold the entire assembly together during storage or transport. The IGT BBQ Box is entirely self-contained and measures only 14" x 10" x 7" when stowed, making it easy to pack inside a Pelican Protector Case.

Snow Peak Grill Plate Half Deep Depth (S-029HD)

Snow Peak Grill Plate Half Deep Depth (S-029HD) $40

Quantity Add to cart

The Grill Plate Half Deep Depth is a cooking pan for the IGT BBQ Box and Snow Peak Pack & Carry Fireplaces. It is constructed of thick carbon steel and weighs a relatively heavy 3.5 lbs. for good heat retention and even cooking. Usable space under the IGT BBQ Box's lid is doubled to 3.5" tall, so larger pieces of meat will fit. Smaller foods will never fall into the fire and flare-ups don't happen because the fats do not drip into the coals. The Grill Plate Half Deep conveniently stores and transports inside your IGT BBQ Box, so there is no space lost and the only penalty is weight. (Shown for illustration purposes with the IGT BBQ Box, which is sold separately.)

Snow Peak Grill Stainless Half Pro (S-029HA)

Snow Peak Grill Stainless Half Pro (S-029HA) $40

Quantity Add to cart

If your IGT BBQ Box's grill grate is corroded, damaged, grungy, or otherwise just needs replacing, Snow Peak makes available the Grill Stainless Half Pro. The Grill Stainless Half Pro drops right into the IGT BBQ Box, as well as the grill bridges of the Pack & Carry Fireplaces. Dimensions are identical to those of the standard grill in the IGT BBQ Box, but the wire is thicker gauge and constructed of stainless steel to provide many years of service.

Snow Peak Charcoal Tray for IGT BBQ Box (XCK-130-03)

Snow Peak Charcoal Tray for IGT BBQ Box (XCK-130-03) $24

Quantity Add to cart

The Snow Peak Charcoal Tray for IGT BBQ Box is a replacement pan for the IGT BBQ Box. Charcoal residue is corrosive. If your pan has corroded from extended use, a replacement is available.

Snow Peak GigaPower Plate Burner Li (GS-400)

Snow Peak GigaPower Plate Burner Li (GS-400) $180

Quantity Add to cart

For single-burner applications, whether standalone or as part of the IGT System, the GigaPower Plate Burner Li serves admirably. When used in the standalone mode, the legs flip out with space remaining below the unit. The GigaPower Plate Burner Li is large enough to fit the the largest pot from the Heavy Duty Multi-Purpose Cook Set I, yet the GigaPower Plate Burner Li weighs only 5.9 lbs and displaces only one IGT unit. A key feature that distinguishes the GigaPower Plate Burner Li from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS PowerGas, and numerous other systems. Thus, the GigaPower Plate Burner Li will use the same fuel as the rest of your outdoor products like lanterns, lighters, small stoves, and so on. The GigaPower Plate Burner Li offers two modes of gas use. The canister may be inverted for very hot fires, or the canister may be stood up for low-temperature cooking or simmering. For even greater fuel versatility, fit the Geoshield Stove with the various Kovea Adapters to run the Geoshield Stove on other types of common camp fuels. An igniter is integral with the unit, and the entire unit is constructed of stainless steel for easy cleaning. A drawstring pouch is included. (Shown for illustration purposes with Snow Peak GigaPower Fuel 250, which is sold separately.)

Snow Peak Utility Bag S Unit (UG-078)

Snow Peak Utility Bag S Unit (UG-078) $63

Quantity Add to cart

As its name would suggest, the Utility Bag S Unit is designed for storing and transporting items that are one Iron Grill Table unit in size, like the Baja Burner. (In Snow Peak Parlance, one IGT unit is "S" while two IGT units is "W". The Utility Bag S Unit holds one S unit.) There is enough room in the Utility Bag S Unit for a Baja Burner and something like a CK-125T bamboo insert. Or, you can dispense with the Baja Burner and carry several different bamboo inserts, stainless inserts, IGT BBQ Box grill grates and charcoal pans, IGT utility boxes, R-103 Stakes, N-001 Peg Hammers, and so on. Use your imagination and many ideas will occur to you. The Utility Bag S Unit is constructed of heavy canvas and has internal stiffeners, so it will keep its shape even when partially filled with heavy items of odd shape. The Velcro closure keeps the carry straps together and takes the weight off the fingers when carrying a heavy load.

Snow Peak Standard Model Two Burner (GS-220)

Snow Peak Standard Model Two Burner (GS-220) $400

Quantity Add to cart

For two-burner applications, whether standalone or as part of the IGT System, the Snow Peak Standard Model Two Burner does an admirable job. The Standard Model Two Burner is large enough to fit the the two largest pots from the Heavy Duty Multi-Purpose Cook Set I, yet it weighs only 15.5 lbs and measures only 18.8" x 14 x 4.3" when stowed. The Standard Model Two Burner is also suitable for use with cast-iron griddles and grills, transforming this burner into a field griddle or grill. A key feature that distinguishes the Standard Model Two Burner from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS PowerGas, and numerous other systems. Thus, the Standard Model Two Burner will use the same fuel as the rest of your outdoor products like lanterns, lighters, small stoves, and so on. The Lindal Valve gas canisters merely thread onto the bottom of the burner. For even greater fuel versatility, fit the Standard Model Two Burner with the various Kovea Adapters to run the stove on other types of common camp fuels. Two separate auto-igniters are fitted for easy ignition of the left or right burner. The burners feature a concave design that is effective with any pot size, and are controllable from the smallest to the most raging heat outputs. The Standard Model Two Burner's body is attractively constructed with aluminum and stainless steel to facilitate cleaning, and its legs can be used for tabletop use with tabletop space remaining below the unit for extra space on small camp tables. (Shown for illustration purposes with the Snow Peak Heavy Duty Multi-Purpose Cook Set and GigaPower Fuel canisters, all of which which are sold separately.)

Snow Peak Double Burner Case (GS-220B)

Snow Peak Double Burner Case (GS-220B) $80

Quantity Add to cart

The Double Burner Case is a beautiful and useful way store and transport the Snow Peak Double Burner or Double Barbeque Box, plus a few extras. The Double Burner Case is constructed of heavy canvas to provide years of hard service. The case clamshells open and closed with two zippers. There is one large accessory pocket on the outside and two mesh accessory pockets on the inside.

snowpeak008 048_.jpg

Snow Peak Heavy Duty Multi-Purpose Cook Set I (CS-021) $180

Quantity Add to cart

The Snow Peak CS-021 has been discontinued according to Snow Peak, yet it continues to peek its head now and then. Snow Peak USA was able to locate a few more of the CS-021 cook sets for EE and they are available again for the time being. The CS-021 set includes three pots, three lids, a mesh strainer/colander, skillet, wooden handle, pot holder, and mesh transport bag. This kit is worlds ahead of the Al Dente Cook Set because it includes the skillet and you can cook more than boiled foods in camp. The small pot has a 3.2-quart capacity, the medium a 4.5-quart capacity, and the large a 7-quart capacity. All of the pieces stack together into a cylinder about 10" wide and 8" tall. Total weight of the pieces is 7.3 lbs. Supplies are extremely limited. If you want this cook set, speak now or forever hold your peace. If you buy a Snow Peak Cook Set, also buy one of the optional Snow Peak Cook Set Handles so that you will have handles for both the saucepan and skillet.

Snow Peak Cook Set Handle (XCS-101-01CS)

Snow Peak Cook Set Handle (XCS-101-01CS) $12

Quantity Add to cart

All three of the Snow Peak Heavy Duty Multi-Purpose Cook sets come with a single wooden handle, a frying pan, and a pot that can accept the wooden handle for using the pot as a saucepan. For those who want more than a single wooden handle in their Cook Sets so that they have both a frying pan and saucepan at their disposal, the Snow Peak Cook Handle is also sold separately. The Cook Set Handle is very small and easily stows within all three of the Heavy Duty Multi-Purpose Cook Sets.

Snow Peak Classic Kettle 1.8 (CS-270)

Snow Peak Classic Kettle 1.8 (CS-270) $100

Quantity Add to cart

The Classic Kettle 1.8 may be Snow Peak's most beautiful product and has many little details that make it a pleasure to use both in the field and at home. The double handle is very comfortable to use even when the Kettle is filled to capacity with hot liquids. The spout cover folds closed to speed boiling and keep the contents hot. The spout cover locks in the open position and locks down the lid to facilitate pouring with the Kettle in one hand and a mug in the other. A hanging loop lets the user hang the Classic Kettle over an open fire during field use. Construction is all stainless steel. 1.8L (60 oz.) capacity. 690g.

Snow Peak Tableware Set L Family (TW-021F)

Snow Peak Tableware Set L Family (TW-021F) $190

Quantity Add to cart

The Snow Peak Tableware Set L Family is a 16-piece set composed of four large plates, four large bowls, four medium bowls, and four small bowls. The plates and bowls are constructed of 18-8 stainless steel and are 0.4mm thick to be lightweight yet tough. The plates and bowls stack within one another to minimize storage space and facilitate transport. When stacked together, the Tableware Set L Family measures 8.3" wide by 3" tall and weighs 62 oz. Nylon mesh bag included.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

Snow Peak Medium Pack & Carry Fireplace (ST-033) $150

Quantity Add to cart

The Snow Peak Medium Pack & Carry Fireplace is designed for campgrounds without dedicated fire rings and where campfires are prohibited without a fire pan. A makeshift campfire scars the earth and violates Tread Lightly! principles. The Medium Pack & Carry Fireplace allows enjoyment of a campfire and leaves no trace. Just dump in firewood and light it. The Medium Pack & Carry Fireplace is constructed of SUS304 stainless steel and will withstand the high heat of wood and charcoal fires without warping or other damage. The Medium Fireplace folds flat to take up a minimum amount of storage space and to make transporting it easier. The Medium Pack & Carry Fireplace measures 13.8" x 13.8" x 9.8" open and 17.8" x 20.3" x 1.3" folded, so it will fit into a Pelican Products 1610NF or 1650NF Protector Case. The Medium Fireplace weighs 7 lbs 11 oz. Lightweight transport bag included.

Snow Peak Medium Fireplace Base Plate (ST-033BP)

Snow Peak Medium Fireplace Base Plate (ST-033BP) $26

Quantity Add to cart

Tread Lightly! principles dictate leaving no trace at all. The Snow Peak Medium Fireplace Base Plate collects ash that inevitably falls through the bottom of the Medium Pack & Carry Fireplace and also protects the ground from heat damage. Slots cut into the Base Plate mate with the legs of the Medium Fireplace and lock them into place for greater security against tipping the Medium Fireplace on uneven surfaces. The Medium Fireplace Base Plate measures 14.6" x 14.6" x 0.3" and weighs 3.4 lbs.

Snow Peak Medium Fireplace Cast Iron Charcoal Bed (ST-033S)

Snow Peak Medium Fireplace Cast Iron Charcoal Bed (ST-033S) $35

Quantity Add to cart

The Snow Peak Medium Fireplace Cast Iron Charcoal Bed fits into the Medium Pack & Carry Fireplace and is designed to optimize the burning of charcoal. Charcoal placed inside the Medium Fireplace without the Charcoal Bed would collect at the bottom and not burn efficiently. Charcoal sits on the Charcoal Bed and is raised off the Fireplace's floor, improving air circulation and combustion. The Cast Iron Charcoal Bed is also suitable for holding a Dutch oven or pot inside the Fireplace. Constructed of cast iron, the Charcoal Bed is capable of withstanding the very high heat of charcoal fires and campfires without warping The Medium Fireplace Cast Iron Charcoal Bed measures 10" x 10" x 0.8" and weighs 5.3 lbs.

Snow Peak Medium Fireplace Grill (ST-033GN)

Snow Peak Medium Fireplace Grill (ST-033MA) $40

Quantity Add to cart

The Snow Peak Medium Fireplace Grill sits on top of the Medium Pack & Carry Fireplace and converts it from a fire pan to a grill. The Medium Fireplace Grill is constructed of chrome-plated steel. It measures 15.5" x 13.6" x 0.8" and weighs 2.4 lbs. For best grilling results, we recommend using the Fireplace Grill with the Medium Fireplace Grill Bridge.

Snow Peak Medium Fireplace Grill Bridge (ST-033GB)

Snow Peak Medium Fireplace Grill Bridge (ST-033GB) $35

Quantity Add to cart

The Snow Peak Medium Fireplace Grill Bridge adjusts to three different heights to adjust the heat from the Pack & Carry Fireplace for optimum cooking. The Medium Fireplace Grill fits onto the Grill Bridge and the Grill Bridge fits onto the Medium Fireplace. The Grill Bridge folds flat when not in use to take up a minimal amount of storage space and facilitate transportation.

Snow Peak Medium Fireplace Complete Carrying Case (ST-033BR)

Snow Peak Medium Fireplace Complete Carrying Case (ST-033BR) $40

Quantity Add to cart

The Snow Peak Medium Fireplace Complete Carrying Case is constructed of No. 8 canvas and is lined with PVC to prevent soiling and damage. The exterior of the Complete Carrying Case is fitted with a mesh pocket. The Complete Carry Case is roomy enough to store and transport the Medium Pack & Carry Fireplace, Fireplace Base Plate, Cast Iron Charcoal Bed, Grill, and Grill Bridge. A fully loaded Complete Carrying Case will still fit inside Pelican Products 1610NF or 1650NF Protector Case.

Snow Peak GigaPower 2 Way Torch (GT-100)

Snow Peak GigaPower 2 Way Torch (GT-100) $40

Quantity Add to cart

The Snow Peak GigaPower 2 Way Torch will facilitate ignition of charcoal and campfires, and is equally suitable for use as a torch for field repairs. The GigaPower 2 Way Torch has a 14,000 BTU output, yet packs considerably smaller than dedicated propane torches. The GigaPower 2 Way Torch offers the flexibility of being powered by standard Lindal Valve canisters like the Snow Peak GigaPower and PRIMUS PowerGas systems. A generator within the torch's head permits the unit to operate at full heat immediately after ignition and with the unit inverted. Included is a CB adapter that will let the GigaPower 2 Way Torch to work with inexpensive CB gas cartridges. The CB adapter will also permit one to use other Lindal Valve equipment with CB cartridges. (Shown for illustration purposes with the PRIMUS 450G PowerGas canister, which is sold separately.)

Snow Peak Folding Torch (GT-110)

Snow Peak Folding Torch (GT-110) $58

Quantity Add to cart

The Snow Peak Folding Torch is an evolution of the older GigaPower 2 Way Torch, and the primary difference is the wood handle that hinges open for use and closed for storage and transport. The open handle is easier to use than the handle-less GigaPower 2 Way Torch because the user can hold the handle rather than the gas canister. Like the GigaPower 2 Way Torch, the Folding Torch has a 14,000 BTU output to light charcoal and campfires, and is equally suitable for use as a torch for field repairs. The Folding Torch offers the flexibility of being powered by standard Lindal Valve canisters like the Snow Peak GigaPower and PRIMUS PowerGas systems. A generator within the torch's head permits the unit to operate at full heat immediately after ignition and with the unit inverted. Included is a CB adapter that will let the Folding Torch work with inexpensive CB gas cartridges. The CB adapter will also permit one to use other Lindal Valve equipment with CB cartridges. Nylon carry pouch included.

Snow Peak Solid Stake 30 (R-103)

Snow Peak Solid Stake 30 (R-103) $6

Quantity Add to cart

The Snow Peak Solid Stake 30 is a ground stake that you can depend upon to drive deeply and surely into the firmest ground and then stay there. The Solid Stake 30 is constructed of 55C steel material that is heated to 2000 degrees in a furnace and then forged into shape by a mechanical press for maximum strength. The Solid Stake 30's unique head shape maximizes utility. The striking face is shaped with square edges so as to maximize driving force and to prevent slipping of the hammer's head on mis-hits. The eyelet mates with the hook on the Snow Peak Peg Hammer for easy removal from the ground. The hook both secures line and sticks into the ground to prevent the Solid Stake 30 from rotating once driven fully into the ground. Everything about this stake is well thought out. The Solid Stake 30 is 12" long and weighs 6 oz. Sold individually.

Snow Peak Peg Hammer PRO.C (N-001)

Snow Peak Peg Hammer PRO.C (N-001) $60

Quantity Add to cart

The Snow Peak Peg Hammer PRO.C is a copper-faced hammer designed for driving stakes into the ground without damaging the stakes. The Peg Hammer's soft copper striking face is designed to deform and peen rather than peening the stakes (the copper striking face is replaceable after several years of hard use), which also decreases the pounding to the user's hand. The Peg Hammer is constructed with a steel head and oak handle. The forged steel head features a hook for removing the Snow Peak Solid Stakes from the ground, and an eyelet for removing conventional stakes with hooked heads. The oak handle is reinforced with steel plates and rivets where it plugs into the hammer's head. The octagonal cross section of the handle lets the user deliver powerful and accurate blows, and the wooden handle transmits the blows effectively. The Peg Hammer also makes an excellent general-purpose hammer for field tool kits, as it will still deliver shocks and hard blows without damaging things like drivetrain components. A detachable lanyard is included. The Peg Hammer PRO.C is 11.5" long and weighs 1.4 lbs.

 

 

Snow Peak White Mini Hozuki Lantern (ES-040WH)

The Snow Peak Mini Hozuki is an improvement on the original Hozuki.

Snow Peak White Mini Hozuki Lantern (ES-040WH)

The Mini Hozuki is smaller and emits a warm color rather than the bluish and clinical color of most LEDs. The translucent silicone hood and warm color output combine to make the Mini Hozuki very easy on the eyes. Choose among three light levels on standard mode. The Mini Hozuki also operates in candle mode in both low and high outputs, where the LED mimics the flickering light from a candle. All of this is controlled by a single switch (pushing the lens with your thumb).

Snow Peak White Mini Hozuki Lantern (ES-040WH)

The silicone loop features a magnetic ball on the end for hanging the Mini Hozuki from just about anywhere.

Snow Peak White Mini Hozuki Lantern (ES-040WH)

The magnetic ball will adhere to the Mini Hozuki's body, so you can hang the Mini Hozuki from common hooks or loops.

Snow Peak White Mini Hozuki Lantern (ES-040WH)

The magnetic ball has sufficient force to suspend the Mini Hozuki from flat steel surfaces as well. No other lamp provides as many hanging options as the Mini Hozuki.

Snow Peak Snow Peak Mini Flame Nocturne Lantern (GL-140-US)

If you get no love from the vast majority of cold, bluish LED lanterns out there, the Snow Peak Mini Flame Nocturne is for you.

Snow Peak Snow Peak Mini Flame Nocturne Lantern (GL-140-US)

A key feature that distinguishes the Mini Flame Nocturne from many other lanterns is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS PowerGas, and numerous other systems.

Snow Peak Snow Peak Mini Flame Nocturne Lantern (GL-140-US)

Burn time is approximately 11 hours on a 110g fuel canister and 35 hours on a standard 250g fuel canister.

Snow Peak Snow Peak Mini Flame Nocturne Lantern (GL-140-US)

The Mini Flame is easily lit with a lighter or match and the flame is an actual flame that burns a warm yellow-white and flickers in the breeze. This isn't a white-hot gas lantern that hisses and requires globes. Rather, it is more like a gas-powered candle that is silent and an ideal way to burn up the remainders of your old fuel canisters while creating an evening of ambience.

Snow Peak Titanium Short Spork (SCT-006)

The Titanium Short Spork is an ultra-lightweight hybrid tool that can be used as a spoon or fork, and the curved edge can also be used to cut softer items. The Titanium Spork represents a double weight reduction, as titanium is substantially lighter than stainless steel, and one need carry only one utensil rather than two or three.

Snow Peak Titanium Short Spork (SCT-006)

More important than weight is titanium's eminent suitability for utensil construction. Titanium is an ideal material for field cutlery as it has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary.

Snow Peak Titanium Short Spork (SCT-006) Snow Peak Titanium Short Spork (SCT-006) Snow Peak Titanium Short Spork (SCT-006)

The Titanium Short Spork is the same length as the disassembled Carry-On Chopsticks and fits into the Carry-On Chopsticks' nylon carry case.

Snow Peak Titanium Short Spork (SCT-006)

Now your Titanium Short Spork will always be with your Carry-on Chopsticks. Store, transport, and use them together so that you don't misplace them.

Snow Peak Titanium Short Spork (SCT-006)

The Titanium Short Spork is shorter than the standard Titanium Spork.

Snow Peak Titanium Spork (SCT-004)

The Titanium Spork provides the same utility as the Titanium Short Spork, but in a longer package.

Snow Peak Titanium Spork (SCT-004)

Both Titanium Sporks work very well on spoonable foods but are also surprisingly effective on noodles. Photo by David Shechter.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

The Three-Piece Titanium Silverware Set includes a knife, fork, and spoon constructed entirely from titanium.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

The Three-Piece Titanium Silverware Set set is ideal for foods that require carving and the curved edge of the Titanium Spork will be insufficient.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

The Three-Piece Silverware Set comes with a nylon carry case.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

The titanium knife, fork, and spoon store within the nylon case, where they are protected against dirt and damage as well as loss. The nylon carry case will also hold the standard Titanium Spork.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

The nylon cases come in various colors. If you would like a particular color, just let us know when ordering.

Snow Peak Three-Piece Titanium Silverware Set (SCT-001)

The nylon case stores almost anywhere, like this Pelican Products Lid Organizer.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

The Titanium Double Wall Cup 450 is an ultra-lightweight mug that provides superior heat and cold insulation due to its double-wall construction.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

Titanium has low thermal conductivity. Add to this the double-walled construction and the Titanium Double Wall Cup 450 is a very friendly mug to the hands when filled with piping hot liquids.

Snow Peak Titanium Double Wall Cup 450 (MG-053) Snow Peak Titanium Double Wall Cup 450 (MG-053)

The Titanium Double Wall Cup 450's handles fold in and out for easy storage and use.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

The handles are not really required for protection from hot or cold contents, as the double-walled construction prevents hot or cold fluids from changing greatly the exterior temperature of the mug. However, the handles can make the mug easier and more convenient to use in some situations. Photo by Jack Quinlan.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

Because of the double-walled construction, hot liquids stay hotter and cold drinks stay colder inside the Titanium Double Wall Cup 450. This shabu-shabu dipping sauce stays hotter than it would in a single-wall mug. Incidentally, if you are looking for a great field meal in cold conditions, try shabu-shabu. Because the pieces are heated in the broth immediately before eating, the food is always piping hot when you eat it and doesn't get cold like other foods. The hot food is very satisfying in cold weather. Photo by Jack Quinlan.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

Titanium does not corrode, so it may be used in marine environments without ferric oxide formations and their resulting unpleasant odor and taste.

Snow Peak Titanium Double Wall Cup 450 (MG-053)

Experience the Zen of outdoor drinking with the Titanium Double Wall Cup. Photo by David Shechter.

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053)

The Lid for the Titanium Double Wall Cup 450 is a plastic lid that fits onto the top of the Titanium Double Wall Cup 450.

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053)

The edges of the Lid seal against the interior walls of the Titanium Double Wall Cup 450.

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053)

The Lid transforms the Titanium Double Wall Cup 450 into a travel mug. Fitment of the Lid both prevents spilling and adds greater insulating properties to the already-efficient Double Wall Cup 450.

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053)

A vent hole in the lid prevents gurgling and spillage.

Snow Peak Lid for Titanium Double Wall Cup 450 (MGC-053)

The Titanium Double Wall Cup 450 with Lid fits perfectly into the Land Rover Genuine Parts Discovery Cupholder Set.

Snow Peak Trek Titanium Bowl (STW-003T)

The Trek Titanium Bowl features all of the benefits of Titanium construction.

Snow Peak Trek Titanium Bowl (STW-003T)

Like almost all Snow Peak products, the Trek Titanium Bowls stack within one another to minimize storage space.

Snow Peak Trek Titanium Bowl (STW-003T) Snow Peak Trek Titanium Bowl (STW-003T)

The Trek Titanium Bowl is 5.5" in diameter and holds a great variety of different camp foods.

Old Pie Pan

Friends don't let friends eat off old pie pans. Photo by David Shechter.

Snow Peak Trek Titanium Plate (STW-002T)

The Trek Titanium Plate is an ultra-lightweight plate with all of the advantages of titanium construction.

Snow Peak Trek Titanium Plate (STW-002T)

Like the vast majority of Snow Peak products, the Trek Titanium Plates stack to minimize storage space.

Snow Peak Trek Titanium Plate (STW-002T)

One of the reasons for using a plate at all is to permit carving with a knife and fork. Titanium is an especially suitable material for the plate because it is not as easily ground down or scratched as aluminum during carving, which could contaminate the food and give it an unpleasant odor or taste.

Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T) Snow Peak Trek Titanium Plate (STW-002T)

The Trek Titanium Plate is 7.5" in diameter, which is large enough for a great variety of different camp foods but small enough to be stored easily. Notice these plates are holding camp food. Many wannabes think it is desirable to cook haute cuisine with ridiculous presentations in camp. These people don't get it and never will. Camp food is rustic food. If you're wondering if your food tower is going to fit on the Trek Titanium Plate for your food blog photos, you're one of these people who doesn't get it.

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

The Titanium Cafe Press is a lightweight and portable coffee press for use in the field. The titanium handles fold for compact storage, yet allow comfortable handling while boiling.

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

Using the Titanium Cafe Press is very simple. It works just like any other coffee press. Just fill with water.

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

Heat the water and then fill with coffee grounds.

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

Push the knob to press.

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

The screen mesh captures the coffee grounds. Pour and drink. Don't add milk, cream, or sugar. If you add these things to coffee, then you don't like coffee. You may think you do. You don't.

Snow Peak Trek 900 Titanium Cafe Press (CS-111)

The Titanium Cafe Press comes with a mesh bag.

Snow Peak Mini Solo Cook Set Titanium (SCS-004T)

The Mini Solo Cook Set Titanium is an ultra-lightweight, three-piece cookset comprised of a 28 oz. pot and lid, and a 10 oz. cup. All pieces feature folding handles for compact storage, yet allow comfortable handling during cooking.

Snow Peak Mini Solo Cook Set Titanium (SCS-004T)

The cup features graduations for measuring.

Snow Peak Mini Solo Cook Set Titanium (SCS-004T)

Snow Peak designed the Mini Solo Cook Set Titanium to be part of a greater whole, and stacking possibilities are many. Two GigaPower Fuel 110 canisters stack within the Mini Solo Cook Set. Alternatively, one GigaPower Fuel 110 and one Titanium GigaPower Stove With Auto Igniter stack within the Mini Solo Cook Set. The Titanium Double Wall Cup 450 and one Titanium Gigapower Stove with Auto Igniter stack within the Mini Solo Cook Set Titanium. The Mini Solo Cook Set Titanium and whatever is stacked within it will stack into the Trek 900 Titanium Component Cooker.

Snow Peak Mini Solo Cook Set Titanium (SCS-004T)

The Mini Solo Cook Set Titanium is constructed entirely of titanium and has all of titanium's advantages.

Snow Peak Mini Solo Cook Set Titanium (SCS-004T)

A mesh bag is included.

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T)

The Trek 900 Titanium Component Cooker is an ultra-lightweight, two-piece cookset comprised of a 30 oz. pot and 8 oz. multipurpose lid/pan/bowl.

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T)

Both pieces feature folding titanium handles for compact storage, yet allow comfortable handling during cooking. With both handles folded, the Trek 900 Titanium Component Cooker and whatever is stacked within it will stack within the Trek 1400 Titanium Component Cooker.

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T) Snow Peak Trek 900 Titanium Component Cooker (SCS-008T)

The Trek 900 Titanium Component Cooker is suitable for a wide variety of different camp cooking.

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T)

A mesh bag is included.

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

The Trek 1400 Titanium Component Cooker is an ultra-lightweight, two-piece cookset comprised of a 47 oz. pot and 17 oz. multipurpose lid/pan/bowl.

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

The inside of the pot is graduated for when measurements are required.

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

The Trek 1400 Titanium Component Cooker is very well suited for cooking light meals on the trail. Photo by Jack Quinlan.

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

The Trek 1400 Titanium Component Cooker can also double as a utility bowl when required in the field. But unlike specialized pots, pans, and bowls, the Trek 1400 Titanium Component Cooker is very lightweight and stacks with your other kitchen items.

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T) Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

A mesh storage bag is included.

Snow Peak Stacking System Snow Peak Stacking System Snow Peak Stacking System Snow Peak Stacking System Snow Peak Stacking System Snow Peak Stacking System

These photos illustrate the stacking features of the various Snow Peak products. The Titanium Double Wall Cup 450 stacks within the Mini Solo Cook Set Titanium, which stacks within the Trek 900 Titanium Component Cooker, which stacks within the Trek 1400 Titanium Component Cooker. Though not shown, a Titanium GigaPower Stove With Auto Igniter easily stacks within the Titanium Double Wall Cup 450. This system represents a very efficient use of storage space. The combined weight of all of these items is also very light.

Snow Peak Geoshield Stove (GS-360)

The Snow Peak Geoshield Stove is the backpacking stove that thinks it's a tabletop stove. Its size and weight say backpacking, but it is equally suitable for tabletop use, and features built-in windscreens and heat shields to maximize heat reflectivity, minimize fuel consumption, and speed cooking times of large amounts of food. The bottom shield both adds greater heat reflectivity and gives the assembled stove greater structure.

Snow Peak Geoshield Stove (GS-360)

In fact, the Geoshield Stove is much more stable than the vast majority of backpacking stoves out there that sit on three feet. The Geoshield Stove will work just fine where many other camp stoves will tip. It will also support the larger pots and pans typically used for family camping.

Snow Peak Geoshield Stove (GS-360)

Unlike many other windscreen stoves, the Geoshield Stove breaks down into very small pieces for easy storage and transport. Assembly and disassembly are easy and intuitive.

Snow Peak Geoshield Stove (GS-360) Snow Peak Geoshield Stove (GS-360)

In the unlikely event you forget how to assemble your Geoshield Stove, there are instructions printed on the included nylon pouches.

Snow Peak Geoshield Stove (GS-360)

When assembled for use, the Geoshield Stove looks as shown above.

Snow Peak Geoshield Stove (GS-360)

When broken down for storage or transport, the Geoshield Stove packs down into a very small space.

Snow Peak Geoshield Stove (GS-360)

The Geoshield Stove's windscreen is about 8" in diameter, making it suitable for the vast majority of field kitchen pots. The windscreen is designed so that the user can invert it to accommodate pots and pans larger than 8" in diameter.

Snow Peak Geoshield Stove (GS-360)

There are deep and shallow notches on the windscreen.

Snow Peak Geoshield Stove (GS-360) Snow Peak Geoshield Stove (GS-360)

In the photos above, the Geoshield Stove is configured so that the grates are sitting below the top edges of the windscreen.

Snow Peak Geoshield Stove (GS-360)

When set up in this configuration, a pot smaller than 8" in diameter will sit slightly down and in the windscreen to maximize heat reflectivity and wind protection.

Snow Peak Geoshield Stove (GS-360)

If you are going to use the Geoshield Stove with pots or pans larger than 8" in diameter, simply assemble the Geoshield Stove with the windscreen inverted and the grates sitting slightly higher than the top edge of the windscreen.

Snow Peak Geoshield Stove (GS-360)

The Geoshield Stove is designed to run on the common isobutane canisters with Lindal Valve threading like the Snow Peak GigaPower or PRIMUS PowerGas systems. This is the industry-standard fuel system for camp stoves.

Snow Peak Geoshield Stove (GS-360) And GigaPower Fuel Snow Peak Geoshield Stove (GS-360) and GigaPower Fuel Inverted

In addition to inverting the windscreen to suit the particular application, the user may choose between two modes of gas use. The canister may be stood up for low-temperature cooking or simmering, or the canister may be inverted for very hot fires and fastest possible boiling times. Running the canister inverted will allow less control over the amount of heat and will burn more fuel, but cooking times will decrease considerably. Take your pick depending on what you are cooking.

Snow Peak Geoshield Stove (GS-360) With Kovea Adapter Snow Peak Geoshield Stove (GS-360) With Kovea Adapter

For even greater versatility, the user may use the Geoshield Stove with the various Kovea Fuel Adapters and run the Geoshield Stove on common butane or propane canisters. Even if you don't plan to run these fuel systems, the Kovea Adapters are inexpensive and very small. So there is no reason not to keep these adapters in your field kitchen in case you run out of your favored fuel. You may borrow fuel canisters from others who run these systems, or you may find these alternative canisters for sale at local gas stations or stores. Running out of stove fuel really ruins a trip. Avoid it.

snowpeak38 002_.jpg

The GigaPower Fuel 250 contains an Isobutane/LPG fuel mixture in a compact canister for use with many different Snow Peak products. Snow Peak's testing has shown the GigaPower Fuel 250 to operate the Titanium GigaPower Stove in temperatures as low as 17 degrees F.

Snow Peak GigaPower Fuel 110 (GP-110US) PRIMUS PowerGas

GigaPower Fuel canisters are equipped with self-sealing safety valves and employ the standard Lindal Valve threading for easy interchangeability with most common gas canisters from other manufacturers like the PRIMUS PowerGas systems, as well as many other canisters from other manufacturers. If you're considering the purchase of a field stove, make sure the threading system it employs is standard like the Lindal Valve threading. Avoid the stoves with proprietary fuel systems.

Snow Peak GigaPower Fuel 110 (GP-110US)

The standard Lindal Valve threading makes the GigaPower Fuel canisters extremely versatile. For example, the Brunton FuelTool will fit the GigaPower canisters.

Snow Peak My Table (LV-034T)

At 16" tall and with a table surface of 12" x 18", the My Table is an ideal lightweight camp table.

Snow Peak My Table (LV-034T)

Here, the My Table is alongside a Navy Kermit Chair to show scale. The 16" height of the My Table is ideal for use with the Kermit Chair.

Snow Peak My Table (LV-034T)

The My Table is constructed of beautiful and environmentally friendly bamboo. The bamboo is covered with a protective clear lacquer. The Snow Peak logo is branded into the top surface of the table. Bamboo is considerably stronger than traditional table woods like maple.

Snow Peak My Table (LV-034T)

The My Table locks in the open position. The My Table's design is such that the more weight there is on the tabletop, the more securely the My Table locks open. The My Table is considerably more stable than other camp tables of the same size.

Snow Peak My Table (LV-034T)

To fold the My Table, simply hinge the legs closed, which will move the springs toward the center and fold the tabletop.

Snow Peak My Table (LV-034T)

The My Table folds to a very compact 17" x 13" x 3".

Snow Peak My Table (LV-034T)

The folded My Table is compact enough to fit into a Pelican Products 1550NF Protector Case. Larger Pelican cases like the 1610NF or 1650NF will more than easily hold the My Table.

Snow Peak My Table (LV-034T)

The My Table comes with a a nylon carry bag.

Snow Peak My Table (LV-034T)

There is a handle sewn into the top of the nylon carry bag.

Snow Peak My Table (LV-034T)

The nylon carry bag protects the bamboo surfaces against abrasion during storage and transport.

Snow Peak Red Folding Chair (LV-070RD)

The Snow Peak Red Folding Chair is constructed of aluminum tubing, cast zinc joints, and durable canvas.

Snow Peak Red Folding Chair (LV-070RD)

The canvas is a beautiful cardinal color that looks great against the black joints and silver aluminum tubing.

Snow Peak Red Folding Chair (LV-070RD)

The Red Folding Chair folds for transport or storage, 27" long x 23" wide x 4" tall when folded. A black nylon carry strap on top of the folded chair acts as a carry handle and a black nylon flap with button snap keeps the chair tightly closed. To deploy the chair, simply unsnap the flap and fold open the chair origami style.

Snow Peak Red Folding Chair (LV-070RD)

When deployed for sitting, the Red Folding Chair measures 23" long (front to back) x 23" wide. The seat is 19" off the ground and the top of the backrest is 34" high. The top of the armrests is 25" off the ground.

Snow Peak Red Folding Chair (LV-070RD) Snow Peak Red Folding Chair (LV-070RD)

Compare these measurements to some of your favorite chairs in your home and you will probably see nearly identical dimensions.

Snow Peak Red Folding Chair (LV-070RD)

Most tables stand about 30" high. The Red Folding Chair works perfectly with these tables.

Snow Peak Red Folding Chair (LV-070RD)

The Red Folding Chair was designed to work with Snow Peak's Iron Grill Table system and of course works perfectly with those tables. The IGT legs come in 660/sitting and 830/standing. The Red Folding Chairs will work better with the 660/sitting legs.

Snow Peak Trek Titanium Plate, Snow Peak Three-Piece Titanium Silverware Set, Snow Peak Titanium Double Wall Cup 450 & Kermit Chair

A very different type of camp chair is the Kermit Chair. The Kermit Chair is a lightweight portable chair that features comfort and elegance not found in most other camp chairs. The Kermit Chair is available in black, green, navy, and red colors. The Kermit Chair's frame is constructed from oak, aluminum, and stainless steel, giving the Kermit Chair a 350 lb. weight rating. The Kermit Chair is a low lounger while the Red Folding Chair is for sitting upright at a table. If you want only one camp chair, the Red Folding Chair might be a better chair for you because it will do everything well while the Kermit Chair will not work well for dining at the table because of its low height and backward tilt and rake.

Snow Peak Iron Grill Table Frame

A very exciting product from Snow Peak is the Iron Grill Table System. The IGT System is a configurable table system that permits the user to change his IGT from simple table to stove or grill, and then breaks down into pieces for easy storage and transport.

Snow Peak Iron Grill Table Frame

While configurability and break-down are nice, the real beauty of the IGT System is that it keeps everyone together. You eat where you cook. People don't get their food and then head back to their camp chair. Everyone stays around the IGT during cooking and eating because it's more social and fun. Camping becomes much more enjoyable for everyone. It's a beautiful thing.

Snow Peak Iron Grill Table Frame

The IGT System also presents a viable alternative to the dedicated grill for backyard barbeques with family and friends. Most backyard grills do not allow cooking at the table. If you think about almost every barbeque you have been to, why do the men hang out around the grill drinking beers while the women are at the tables and the children playing elsewhere? We do not presume to have the answer to this question. And yet it is undeniable that this is how most barbeques play out. Only when the food is all done and ready to serve do people come together at the table. We prefer the IGT System with everyone prepping, cooking, and eating together at the table. It's much more social and fun this way.

Snow Peak Iron Grill Table Frame

Just as it does in the field, the home IGT System will bring everyone together. It really works, and you will find yourself using your dedicated grill less and less because you will find it is not as much fun.

Snow Peak Iron Grill Table Frame

Whether at home or in the field, get everyone involved in the food preparation. Lay out the ingredients and skewers and have people help out.

Snow Peak Iron Grill Table Frame

Some can do the cutting, at the IGT.

Snow Peak Iron Grill Table Frame

Others can do the skewering or other prep work. Everybody works together to prepare the food, at the IGT.

Snow Peak Iron Grill Table Frame

Everyone helps with the cooking, at the IGT.

Snow Peak Iron Grill Table Frame

Everyone eats together, at the IGT. It's more social and it's more fun. And the food tastes better for some reason.

Snow Peak Iron Grill Table Frame

The heart of the IGT System is the Iron Grill Table. Snow Peak offers the Iron Grill Table in three sizes--Short, Normal and Long. The Short version houses two IGT units, the Normal version houses three IGT units, and the Long version houses four IGT units. We prefer the Short and the Normal size because it is substantially easier to store and transport than the Long version. The long version is roughly four feet long and doesn't really work in most expedition vehicles. The Long is also unsuitable when you consider that you can carry multiple IGT frames easily.

Snow Peak Iron Grill Table Frame

The Iron Grill Table may be configured in many different ways to suit your preferences. The Iron Grill Table Frame Short houses two IGT units and can be fitted with a GigaPower Plate Burner Li plus a one-unit Bamboo insert,

Snow Peak Iron Grill Table Frame

or with a BBQ Box plus insert.

Snow Peak Iron Grill Table Frame

If you prefer to combine, the Iron Grill Table Frame Short is perfect for the GigaPower Plate Burner Li and the BBQ Box combination.

Snow Peak Iron Grill Table Frame

This three-unit Iron Grill Table has been fitted with a Standard Model Two Burner stove. Because this Iron Grill Table accommodates three IGT units and the Standard Model Two Burner occupies two IGT units, there is empty space on this Iron Grill Table.

Snow Peak Iron Grill Table Frame

To fill the space on this Iron Grill Table, the IGT Stainless Tray Two-Piece Set may be used. These stainless trays maximize tabletop space.

Snow Peak Iron Grill Table Frame

Alternatively, the Standard Model Two Burner may be slid to the side and a IGT Wood Table S Bamboo may be used. The IGT Wood Table S Bamboo can be used as a makeshift cutting board or collection area. These are merely some examples to give you an idea of what the IGT System is. There are many combinations you can use with different inserts.

Snow Peak Iron Grill Table Frame

The long sides of the Iron Grill Table are aluminum extrusions that are shaped to accept different attachments.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

If you prefer to eat farther from what is being cooked or want lots more tabletop space, the IGT Multi Function Table Bamboo hooks onto the side of the Iron Grill Table.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

In this configuration, the cook can stand right over the food while the guests sit or stand comfortably on the sides.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

More guests? Just add another IGT Multi Function Table Bamboo on the other side of the Iron Grill Table. Just don't have the common my-set-up-is-more-elaborate-than-yours approach for your personal IGT. It is pretty silly to have a set-up this big if you have two people in camp. The IGT System quickly loses its charm if you have some ridiculously large or elaborate "rig" in your camp. You really don't want to own anything that can be called a "rig".

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

If that crazy aunt comes to visit, just arrange the IGT Multi Function Table Bamboo pieces so that she is farther away from you. It works.

Snow Peak IGT Multi Function Table Bamboo (CK-116T) Snow Peak IGT Multi Function Table Bamboo (CK-116T)

Each IGT Multi Function Table Bamboo comes with retracting hooks that enable the user to connect the IGT Multi Function Table Bamboo to the Iron Grill Table or to another IGT Multi Function Table.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

Each IGT Multi Function Table Bamboo comes with two extruded aluminum blocks that enable transverse attachment to the Iron Grill Table.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

These extruded blocks slide into the long sides of the Iron Grill Table,

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

and the IGT Multi Function Table Bamboo hooks into to the extruded blocks. There are certainly applications where this orientation could work, but we prefer to attach multiple pieces in a lengthwise manner as shown below.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

This lengthwise orientation is probably more useful for the vast majority of applications.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

When attached in the lengthwise manner, the hooks on the IGT Multi Function Table Bamboo engage holes in the short sides of the Iron Grill Table.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

The other end of the IGT Multi Function Table Bamboo holds the aluminum blocks with holes that will accept an additional IGT Multi Function Table Bamboo.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

The joint between two IGT Multi Function Table Bamboos is shown above.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

The bottom of the aluminum blocks accept the legs of your choice.

Snow Peak IGT 830 Leg Set (Tall) (CK-114) Snow Peak IGT 660 Leg Set (Short) (CK-113)

Leg choice is important for the IGT System. Snow Peak offers four leg lengths for the IGT System: 32", 26", 16", and 12". We opine that the 32" and 26" lengths are the most useful for most outdoor camping. The 16" and 12" lengths are more suited for tatami-style use, which few people will do in the field because the ground is dirty or very cold.

Snow Peak Iron Grill Table Frame 830 Set (CK-147)

We recommend the 32" height for standing applications. Shorter than this and most adults will have to stoop over the Iron Grill Table.

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

The 32" height will suit most adults just fine. Note that Ho is using the IGT Multi Function Table Bamboo without an Iron Grill Table. This is a quick and dirty way to set up a tabletop for lunch on the trail. Always remember that more is not better. In fact, it's usually worse.

Snow Peak IGT System

Many people will like to use the IGT System at home in their backyards for family barbeques, with everyone sitting around the table. For sitting applications, we recommend the 26" tall legs to lower the table to sitting height.

Snow Peak IGT System

The 26" legs lower the IGT to a very comfortable height with most chairs. Even children have no trouble at this height. For Korean barbeque meals, just cook right in front of you and then eat. It's very easy. The same set-up would apply for yakitori, shabu-shabu, or hot pot on the Iron Grill Table. In this way, the IGT System is a lot like the Engel Freezer Fridge--it is just as useful in the home as it is in the field and represents great value.

Snow Peak IGT 830 Leg Set (Tall) (CK-114)

The top of each IGT Leg features a centering pilot and locking notches for attachment to the IGT tabletops.

Snow Peak IGT 830 Leg Set (Tall) (CK-114)

Just insert the legs and twist to lock them in position. The IGT legs and tabletops are made to precise tolerances and the legs do not wiggle once attached to the tabletops.

Snow Peak IGT 830 Leg Set (Tall) (CK-114) Snow Peak IGT 830 Leg Set (Tall) (CK-114)

The centering pilot will protrude slightly from the tabletops to give indication that the legs are fully seated and firmly locked in position.

Snow Peak IGT 830 Leg Set (Tall) (CK-114)

Most ground is not perfectly flat or level. This is especially true in the field, but it is also true for many backyards.

Snow Peak IGT 830 Leg Set (Tall) (CK-114)

If you have a large IGT set-up with multiple pieces linked together, the uneven ground will really come into play and cause the tabletops not to align.

Snow Peak IGT 830 Leg Set (Tall) (CK-114) Snow Peak IGT 830 Leg Set (Tall) (CK-114)

The IGT Legs are adjustable for length to accommodate uneven ground. If you are very tall, you can use the leveling feature to "stretch" out the legs a little. These screw-in adjusters work perfectly well in all but very soft ground, where the weight of the IGT frame and its contents will push the legs into the soft ground.

Snow Peak Iron Grill Table

A very useful feature of the IGT System is its breakdown for compact storage and transportation. Note the immense tabletop space provided by the set-up above. It's huge. It's almost ridiculously huge.

Snow Peak Iron Grill Table

Ho measured the length of an Iron Grill Table and two IGT Multi Function Tables.

Snow Peak Iron Grill Table

The total length was about 100".

Snow Peak Iron Grill Table Snow Peak Iron Grill Table

And yet look at the total space taken by these components when broken down and Tetris'd together. In this stack are two IGT Slide Top Bamboos, two IGT Wood Table S Bamboos, one IGT Frame, two IGT Multi Function Table Bamboos, eight 32" legs, and one IGT Stainless Tray Two-Piece Set. This is Ho's standard set-up for his Discovery. Ho adhered felt pucks to the bottoms of the tabletops to eliminate rattling and scarring of the pieces. There is very little wasted space inside this stack. The stack would be even shorter in height if he had used the shorter 26" sitting legs because the shorter legs fit inside the IGT frame. However, Ho prefers the 32" standing legs for field use.

Snow Peak Iron Grill Table Snow Peak Iron Grill Table Snow Peak Iron Grill Table

Ho built a small shelf inside the cargo area of his Discovery and the entire stack just slides into the area under the shelf. The shelf is low enough that he doesn't even require a fridge slide for his Engel.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

The raised cargo flooring is excellent if your IGT pieces are organized, stored, and transported in a single vehicle. If you want a method that isn't vehicle-specific, there is the Iron Grill Table Storage Case. This is an excellent way to transport the IGT pieces in different vehicles, or even store your IGT pieces organized in a closet when you are not using them in the vehicle or backyard.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

The Iron Grill Table Storage Case measures 38" x 23". A three-unit IGT frame measures 34" x 20" x 1". The Iron Grill Table Storage Case will easily hold a three-unit IGT frame, multiple sets of legs, an IGT Multi Function Table Bamboo side extension, and several IGT inserts. The case is sized so that it will expand when you want to pack it with lots of IGT items, but it will sit nice, flat, and snug without the contents sliding around too much.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

Construction is of heavy-duty canvas. All edges and seams are double-layered canvas to prevent them from fraying, unraveling, or pulling apart. The handles go all the way under the case to reinforce the bottom. There are two additional handles on the sides for loading and unloading the case from vehicles. The side handles also stabilize the case when it is carried on the shoulder like a huge purse.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

A single Fastex buckle keeps the contents from falling out,

Snow Peak Iron Grill Table Storage Case (CK-100BR)

and easily unsnaps to give access to the contents.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

The Iron Grill Table Storage Case includes five black nylon pouches for segregating various IGT accessories.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

The Engrish instructions let us know that the five nylon pouches are for:

And of course the nylon bags will fit other items as well if, for example, you don't own a wind screen. All of the aforementioned items, bags, and a CK-147 IGT frame will fit inside the Iron Grill Table Storage Case.

Snow Peak Iron Grill Table Storage Case (CK-100BR)

Each black nylon bag has the Snow Peak logo.

Snow Peak Tote Bag Jumbo (UG-072R)

The Tote Bag Jumbo is similar to the Iron Grill Table Storage Case, but deeper front to back to accommodate more IGT items as well as other appurtenances like folding chairs.

Snow Peak Tote Bag Jumbo (UG-072R)

The Tote Bag Jumbo measures 36" x 18" x 9". A three-unit IGT frame measures 34" x 20" x 1", so the Tote Bag Jumbo will easily accommodate multiple three-unit IGT frames, multiple sets of legs, multiple IGT Multi Function Table Bamboo side extensions, multiple IGT inserts, as well as large items like folding camp chairs.

Snow Peak Tote Bag Jumbo (UG-072R)

Shown for illustration above are the three-unit IGT frame and two Red Folding Chairs, and there is still room for plenty more.

snowpeak024 050_.jpg

This very large Iron Grill Table consists of a three-unit IGT frame, two bamboo wings, two bamboo side extensions, and multiple sets of legs.

Without the two BBQ Boxes, everything you see above stacks into a tight space and will easily fit into the Tote Bag Jumbo.

Snow Peak Tote Bag Jumbo (UG-072R)

Construction is of heavy-duty canvas. All edges and seams are double-layered canvas to prevent them from fraying, unraveling, or pulling apart.

Snow Peak Tote Bag Jumbo (UG-072R)

Accessory handles surround the Tote Bag Jumbo to facilitate handling and loading/unloading from vehicles.

Snow Peak Tote Bag Jumbo (UG-072R)

The handles feature a surround to keep the handles tidy.

Snow Peak Tote Bag Jumbo (UG-072R)

The contents are secured with two Fastex buckles.

Snow Peak Iron Grill Table Frame 660 Set (CK-145)

The normal Iron Grill Table houses three IGT units. Depending on how you choose to configure your Iron Grill Table, you may want different inserts to fill the empty spots.

Snow Peak Iron Grill Table Frame 830 Set (CK-147)

The set-up shown above with one Standard Model Two Burner and one IGT BBQ Box leaves no empty space.

Snow Peak Iron Grill Table Frame 830 Set (CK-147)

If you are using only the Standard Model Two Burner, you will have one empty IGT unit. You can either leave these spaces empty or choose to fill them.

Snow Peak IGT Stainless Tray Two-Piece Set (CK-120)

The IGT Stainless Tray Two-Piece Set can fill that void. The two stainless pieces fill one IGT unit.

Snow Peak IGT Stainless Tray Two-Piece Set (CK-120)

With your Iron Grill Table configured like this, you now have more tabletop space for your spoons, spatulas, or other utensils.

Snow Peak IGT Stainless Tray Two-Piece Set (CK-120)

The IGT Stainless Tray Two-Piece Set is especially suited for filling voids around very hot inserts like the IGT BBQ Box. The stainless pieces are resistant to heat and can be scoured clean when they stain from grease splatters.

Snow Peak IGT Stainless Tray Two-Piece Set (CK-120)

If you are using two IGT BBQ Boxes to feed a large party, you can fill the void in the Iron Grill Table with the IGT Stainless Tray Two-Piece Set. Utensils like tongs or raw meats awaiting their turn on the fire can sit on the stainless trays and not intrude into the eating areas. The empty space between the two IGT BBQ Boxes permits you to have have lots of skewers encircling both grills without burning the skewer ends.

Snow Peak IGT Wood Table S Bamboo (CK-125T)

An alternative to the IGT Stainless Tray Two-Piece Set is the IGT Wood Table S Bamboo, which is is warm to the touch and is very beautiful. The more you use it, the more weathered and beautiful it becomes.

Snow Peak IGT Wood Table S Bamboo (CK-125T)

The IGT Wood Table S Bamboo serves as a collection area for utensils or ingredients, and can double as an eating area or a makeshift cutting board.

Snow Peak IGT Wood Table S Bamboo (CK-125T)

Like all of Snow Peak's bamboo pieces, the IGT Wood Table S Bamboo is laminated in a crisscross pattern to minimize warping and increase strength.

Snow Peak IGT Wood Table S Bamboo (CK-125T)

The Snow Peak logo is branded into the bamboo.

Snow Peak IGT Stainless Box Half Unit (CK-025) Snow Peak IGT Stainless Box S Unit (CK-050)

Snow Peak also offers steel storage boxes, in both half and full IGT sizes.

Snow Peak IGT Stainless Box S Unit (CK-050) Snow Peak IGT Stainless Box S Unit (CK-050)

The storage boxes are constructed entirely of stainless steel and are engraved with the Snow Peak logo on both the lid and sides.

Snow Peak IGT Stainless Box S Unit (CK-050) Snow Peak IGT Stainless Box S Unit (CK-050) Snow Peak IGT Stainless Box S Unit (CK-050)

These stainless storage boxes fit into the IGT system and provide useful storage. Shown for illustration is the Tableware Set L Family, but any number of fuel canisters, mugs, silverware sets, charcoal, and so on would fit into these storage boxes. Use your imagination and many examples will occur to you.

Snow Peak IGT Stainless Box Half Unit (CK-025) Snow Peak IGT Stainless Box S Unit (CK-050)

The IGT Stainless Box Half Unit takes up a half-IGT unit, while the Stainless Box S unit takes up one S or full IGT unit.

Snow Peak IGT Stainless Box Half Unit (CK-025) and Snow Peak IGT Stainless Box S Unit (CK-050)

The storage boxes are 6" tall.

Snow Peak IGT Stainless Box Half Unit (CK-025) and Snow Peak IGT Stainless Box S Unit (CK-050)

The stainless lids of the storage boxes also are suitable as tabletop inserts to use a workspace or simply as filler for empty IGT spaces in your frame.

now Peak IGT Stainless Half Unit Tray (CK-026) Snow Peak IGT Stainless Single Unit Tray (CK-051)

In fact, the lids are so handy that Snow Peak makes them available separately.

now Peak IGT Stainless Half Unit Tray (CK-026)

The lid from the IGT Stainless Box Half Unit is called the IGT Stainless Half Unit Tray,

Snow Peak IGT Stainless Single Unit Tray (CK-051)

and the lid from the IGT Stainless Box S Unit is called IGT Stainless Single Unit Tray.

now Peak IGT Stainless Half Unit Tray (CK-026)

The IGT Stainless Unit Trays insert into your Iron Grill Table to fill unused portions of your frame, provide a work surface, or act as a non-flammable and non-staining heat buffer for very hot IGT items such as the BBQ Box.

The Cutting Board Set L provides a convenient cutting board for your Iron Grill Table system, as well as a safe and convenient way to transport your field cutlery.

For transport or storage, the Cutting Board Set L folds and stays closed with a hinged clasp.

When folded open, the Cutting Board Set L takes up one IGT unit and sits flush inside the Iron Grill Table frame. The cutting board is raw wood and has the Snow Peak logo branded into the surface. If you like, you can oil the cutting board. Or, you can leave it raw.

The knife is the popular Santoku pattern. The blade is stainless steel and 6.5" long, which is more than large enough for the vast majority of field cooking.

The knife sits inside the cutting board,

and a magnet holds the knife in place. If you happen to open the Cutting Board Set L at an awkward angle, you won't be surprised by the knife poking into your foot.

While the Cutting Board Set L is optimized for the Iron Grill Table system, it will also work on any tabletop or other flat surface. The inside of the cutting board features feet.

If you like, you can use the Cutting Board Set L on any flat surface.

The feet will raise the cutting board above the flat surface.

Snow Peak IGT BBQ Box (CK-130)

Made entirely of stainless steel, the IGT BBQ Box is easy to use, easy to clean, and extremely durable. The IGT BBQ Box may be used standalone or as part of the Iron Grill Table System.

Snow Peak IGT BBQ Box (CK-130)

If you want to use your IGT BBQ Box as part of the IGT System, simply plop the IGT BBQ Box into your Iron Grill Table.

Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box displaces one IGT unit, so up to three boxes may be fitted to the Iron Grill Table at once. You should never require more than two IGT BBQ Boxes, no matter how large your party is.

Shin-Sen-Gumi

Close to the EE Shop is a famous yakitori restaurant called Shin-Sen-Gumi. The food there is really good and the place is packed.

Shin-Sen-Gumi

This is the grill at Shin-Sen-Gumi. It's not large at all. And yet Danielsan there can feed dozens of people using this small and simple grill. The key with this system is that all of the food is not cooked at once. The first batch is cooked and served, and the guests eat the first batch while the the next batch is cooking. This rotation system works very well and gives the meal a certain pace and flow that are very appealing. Think about your favorite sushi joint or a chef's taster menu and you will see some of the most enjoyable meals flow in this manner. And it's even more fun when everyone is getting involved in the prep work and serving. We learned a lot from the crew at Shin-Sen-Gumi.

Snow Peak IGT BBQ Box (CK-130)

In the field where winds can be high and temperatures low, this system works even better. The food is hot off the grill when served and eaten before it can get cold. The coals of the IGT BBQ Box also help to keep people warm. This system keeps everyone gathered around the Iron Grill Table. Camping is more fun and social this way, and we really like it.

Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box is probably our favorite part of the IGT System.

Snow Peak IGT BBQ Box (CK-130)

A hot lid may be removed easily using the integral handles.

Snow Peak IGT BBQ Box (CK-130)

During use, the lid handles may be kept standing to facilitate removing the lid during cooking.

Snow Peak IGT BBQ Box (CK-130)

The handles fold flat for compact storage.

Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box's lid features a vent that may be closed if desired.

Snow Peak IGT BBQ Box (CK-130)

The sides of the IGT BBQ Box are vented. The IGT BBQ Box sits above the ground so as not to burn tabletops during cooking.

Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box is very simple to use.

Snow Peak IGT BBQ Box (CK-130)

Just fill the removable pan with charcoal,

Snow Peak IGT BBQ Box (CK-130)

and drop your favorite meal on top of the removable grate.

Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box was designed specifically for yakitori,

Snow Peak IGT BBQ Box (CK-130)

or kabobs,

Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130)

but is equally suitable for Korean BBQ dishes, sausages, shrimp, buns, and so on. If you are wondering if your gigantic slabs of meat will fit on the IGT BBQ Box, they probably will not.

Or maybe they will. Many savvy IGT BBQ Box users double them up for large slabs of meat. Clever.

Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130)

Once lit, the charcoal pan can be raised or lowered with a lever to increase or decrease heat as desired.

Snow Peak IGT BBQ Box (CK-130)

The charcoal pan is raised or lowered by means of a scissor mechanism within the IGT BBQ Box. The scissor mechanism is controlled by the lever. Three different heights may be selected.

Snow Peak IGT BBQ Box (CK-130)

Thus, whether your coals are very searing hot or only slightly hot, you can still cook at your desired heat level.

Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box's legs stow inverted to minimize storage space.

Snow Peak IGT BBQ Box (CK-130)

A nylon strap is provided to hold the entire assembly together during storage or transport.

Snow Peak IGT BBQ Box (CK-130) Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box is entirely self-contained and measures only 14" x 10" x 7" when stowed, making it easy to pack inside a Pelican 1550NF Protector Case with room for a bag of charcoal.

Snow Peak IGT BBQ Box (CK-130)

The IGT BBQ Box was designed for Asian-style foods, which are typically cut to bite-sized pieces that can be handled with chopsticks.

Snow Peak Grill Plate Half Deep Depth (S-029HD)

For very large or very small foods, Snow Peak also makes available the Grill Plate Half Deep Depth.

Snow Peak Grill Plate Half Deep Depth (S-029HD)

The Grill Plate Half Deep Depth drops right into the IGT BBQ Box,

Snow Peak Grill Plate Half Deep Depth (S-029HD)

and the Snow Peak Pack & Carry Fireplace Grill Bridge.

Snow Peak Grill Plate Half Deep Depth (S-029HD)

The Grill Plate Half Deep Depth is also suitable for holding hot coals on the Iron Grill Table frame.

Snow Peak Grill Plate Half Deep Depth (S-029HD)

The Grill Plate Half Deep Depth is constructed of carbon steel and is relatively heavy at 3.5 lbs. for good heat retention and even cooking.

Snow Peak Grill Plate Half Deep Depth (S-029HD)

If you like your meats seared all over or if you fancy cooking smaller vegetables in camp, the Grill Plate Half Deep Depth is very suitable. There are also no flare-ups from fats dripping onto the charcoal or wood. The Grill Plate Half Deep does not replace the grill grate but rather supplements it.

Snow Peak Grill Plate Half Deep Depth (S-029HD) Snow Peak Grill Plate Half Deep Depth (S-029HD)

The Grill Plate Half Deep Depth also increases the effective size of your IGT BBQ Box. The photo on the left shows the usable height between the standard grill grate and the lid at about 1.75". The photo on the right shows the usable height between the Grill Plate Half Deep Depth and the lid at about 3.5". The usable height is doubled to allow larger food pieces to be cooked in the IGT BBQ Box. If you have tried to cook larger pieces of food on the BBQ Box and had to do so without the lid, you will appreciate the greater usable space the Grill Plate Half Deep Depth allows.

Snow Peak Grill Plate Half Deep Depth (S-029HD) Inside IGT BBQ Box

The Grill Plate Half Deep Depth is also convenient to store and transport because it can be kept inside the IGT BBQ Box.

Snow Peak Grill Stainless Half Pro (S-029HA)

If your IGT BBQ Box's grill grate is corroded, damaged, grungy, or otherwise just needs replacing, Snow Peak makes available the Grill Stainless Half Pro.

Snow Peak Grill Stainless Half Pro (S-029HA)

The Grill Stainless Half Pro drops right into the IGT BBQ Box,

Snow Peak Grill Stainless Half Pro (S-029HA)

as well as the grill bridges of the Pack & Carry Fireplaces.

Snow Peak Grill Stainless Half Pro (S-029HA)

Dimensions are identical to those of the standard IGT BBQ Box.

Snow Peak Grill Stainless Half Pro (S-029HA)

However, the Grill Stainless Half Pro is constructed of stainless steel and the wire gauge is thicker to provide many years of service.

Snow Peak GigaPower Plate Burner Li (GS-400) Snow Peak GigaPower Plate Burner Li (GS-400)

For single-burner applications, whether standalone or as part of the IGT System, the GigaPower Plate Burner Li serves admirably. When used in the standalone mode, the legs flip out with space remaining below the unit. The GigaPower Plate Burner Li is large enough to fit the the largest pot from the Heavy Duty Multi-Purpose Cook Set I, yet it weighs only 5.9 lbs and displaces only one IGT unit.

Snow Peak GigaPower Plate Burner Li (GS-400)

A key feature that distinguishes the GigaPower Plate Burner Li from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading,

Snow Peak GigaPower Fuel Snow Peak GigaPower

like the Snow Peak GigaPower,

PRIMUS PowerGas PRIMUS PowerGas

PRIMUS PowerGas,

Jetboil Jetpower

and numerous other systems from other manufacturers.

Snow Peak GigaPower Snow Peak GigaPower PRIMUS OmniFuel PRIMUS OmniFuel Brunton Liberty & Brunthane Brunton FuelTool & Brunthane Brunton Helios & FuelTool PRIMUS Filling Adapter PRIMUS Filling Adapter

Thus, the GigaPower Plate Burner Li will use the same fuel system as the rest of your outdoor products like lanterns, lighters, small stoves, and so on. If you are the type who wants a bigger-is-better 20 lb. propane tank on top of his vehicle, this concept will not appeal to you.

Snow Peak GigaPower Plate Burner Li (GS-400) Snow Peak GigaPower Plate Burner Li (GS-400)

The GigaPower Plate Burner Li offers two modes of gas use. The canister may be inverted for very hot fires, or the may be stood up for low-temperature cooking or precise simmering.

Snow Peak GigaPower Plate Burner Li (GS-400)

When used with the IGT System, the canister is normally inverted. The claw system that keeps the can secured is spring-loaded to accommodate canisters of different widths. So no matter what the particular brand of Lindal Valve canister you have at any time, the GigaPower Plate Burner Li will still hold the can inverted. If you want to cook with low heat for simmering, just flip over the canister and secure the brass plug to the unit's can holder and it will suspend the can with the valve up.

Snow Peak GigaPower Plate Burner Li (GS-400) Snow Peak GigaPower Plate Burner Li (GS-400) with Kovea Adapter and Canister Butane Fuel Snow Peak GigaPower Plate Burner Li (GS-400) with Kovea Adapter and Coleman Propane Fuel

For even greater fuel versatility, fit the Geoshield Stove with the various Kovea Adapters to run the Geoshield Stove on other types of common camp fuels. The Kovea Adapters will permit you to run your Baja Burner on CB canisters (found at nearly all Asian markets) and Coleman canisters (found at nearly all local hardware stores).

Snow Peak GigaPower Plate Burner Li (GS-400)

The control knob plus the different canister orientations can heat output from output from the lowest simmer to the towering inferno.

Snow Peak GigaPower Plate Burner Li (GS-400) Snow Peak GigaPower Plate Burner Li (GS-400)

The control knob folds for more compact storage and transport.

Snow Peak GigaPower Plate Burner Li (GS-400) Snow Peak GigaPower Plate Burner Li (GS-400)

An igniter is integral to the unit, so you never have to search for matches or a lighter.

Snow Peak GigaPower Plate Burner Li (GS-400)

The GigaPower Plate Burner Li's body is constructed of stainless steel to facilitate cleaning.

Snow Peak GigaPower Plate Burner Li (GS-400)

The GigaPower Plate Burner Li comes with a black nylon drawstring pouch for storage.

snowpeak40 010_.jpg

The nylon drawstring pouch works just fine, but if you want something a little nicer, or want something with a little more protection, or want to hold a little more than just the Baja Burner, there is the Utility Bag S Unit.

Snow Peak Utility Bag S (UG-078)

As its name would suggest, the Utility Bag S Unit is centered around holding items that are one Iron Grill Table unit in size. In Snow Peak Parlance, one IGT unit is "S" while two IGT units is "W". The S bag holds one S unit. There is enough room in the Utility Bag S Unit for a Baja Burner and something like a CK-125T bamboo insert. Smaller items like the three-piece silverware sets and chopsticks will also fit between the Baja Burner and the bamboo insert. The Utility Bag S will also fit several different bamboo inserts, stainless inserts, grill grates, utility boxes, stakes, hammers, and so on. Use your imagination and many ideas will occur to you.

Snow Peak Utility Bag S (UG-078)

The Utility Bag S Unit will take a good amount of weight and contents of different shapes and sizes without losing its shape. The bag is constructed of heavy canvas and cotton webbing,

Snow Peak Utility Bag S (UG-078)

and there is a good amount of structure to the bag. There are resin inserts on the sides and bottom so that the bag will retain its shape and will not collapse when not filled completely. The top of the bag remains "soft" with just a layer of heavy canvas and no structural layering.

Snow Peak Utility Bag S (UG-078) Snow Peak Utility Bag S (UG-078)

A Velcro closure secures the carry straps together during transport.

Snow Peak Standard Model Two Burner (GS-220)

For two-burner applications, whether standalone or as part of the IGT System, there is the Standard Model Two Burner.

Snow Peak Standard Model Two Burner (GS-220)

The Standard Model Two Burner displaces two IGT units in the Iron Grill Table.

Snow Peak Standard Model Two Burner (GS-220)

The Standard Model Two Burner simply plops into the Iron Grill Table and is held by gravity.

Snow Peak Standard Model Two Burner (GS-220)

The Standard Model Two Burner is large enough to fit the the two largest pots from the Heavy Duty Multi-Purpose Cook Set I, yet it weighs only 15.5 lbs and measures only 18.8" x 14 x 4.3" when stowed. Thus, the Standard Model Two Burner is large enough for cooking for multiple people, yet it is small enough to fit inside field kitchens. The Standard Model Two Burner easily fits into a Pelican 1650NF Protector Case. We use a Pelican 1650NF Protector Case with 1659 Lid Organizer and Padded Divider for John's field kitchen.

Snow Peak Standard Model Two Burner (GS-220)

The Standard Model Two Burner is also suitable for use with cast-iron griddles and grills. These flat pans pack more compactly than a cast-iron frying pan.

Snow Peak Standard Model Two Burner (GS-220)

The griddle side is useful for cooking breakfasts.

Snow Peak Standard Model Two Burner (GS-220)

The grill side is useful for grilling meats and vegetables. Photo by Aaron Shrier.

Snow Peak Standard Model Two Burner (GS-220)

Once seasoned properly, the cast-iron grill/griddle easily cleans up even after cooking "dirty" foods. The Standard Model Two Burner cleans up just as easily. Photo by David Shechter.

Snow Peak Standard Model Two Burner (GS-220)

A key feature that distinguishes the Standard Model Two Burner from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS PowerGas, and numerous other systems from other manufacturers. Thus, the Standard Model Two Burner will use the same fuel system as the rest of your lanterns, lighters, small stoves, and so on.

Snow Peak Standard Model Two Burner (GS-220)

This interchangeability makes the Standard Model Two Burner extremely versatile. With only one type of camp fuel required for all of your camping gear, logistics are greatly simplified.

Snow Peak Standard Model Two Burner (GS-220)

The Lindal Valve gas canisters simply thread onto the bottom of the burner.

Snow Peak Standard Model Two Burner (GS-220)

Two separate auto-igniters are fitted for easy ignition of the left or right burner.

Snow Peak Standard Model Two Burner (GS-220)

The burners feature a concave design that is effective with any pot size and is controllable from the smallest to the most raging heat outputs.

Snow Peak Standard Model Two Burner (GS-220) Snow Peak Standard Model Two Burner (GS-220)

The grills are adjustable for height by orienting the grills differently.

Snow Peak Standard Model Two Burner (GS-220)

A windscreen is fitted to minimize heat loss and to conserve fuel.

Snow Peak Standard Model Two Burner (GS-220)

Setting up the Standard Model Two Burner for standalone use is very simple. Just attach the legs and the windscreen.

Snow Peak Standard Model Two Burner (GS-220)

The legs plug into the sides of the body. The Standard Model Two Burner's body is constructed of aluminum and stainless steel to facilitate cleaning and other maintenance.

Snow Peak Standard Model Two Burner (GS-220)

The interior of the Standard Model Two Burner is coated with fluorine to facilitate cleaning.

Camp Table

Most camp stoves sit flat on the tabletop, necessitating a larger table to have adequate workspace.

Snow Peak Standard Model Two Burner (GS-220) Snow Peak Standard Model Two Burner (GS-220)

The Standard Model Two Burner's legs can be used for tabletop use with tabletop space remaining below the unit for extra space on small camp tables. When you run out of working room on your camp table, place your non-used items below the stove to create extra tabletop space. The Standard Model Two Burner's additional height is also more suited to most camp tables, which generally are low for more compact storage and easier transport.

Snow Peak Standard Model Two Burner (GS-220)

All of the foregoing kitchen gear will fit into a Pelican Products 1650 Protector Case. The kitchen pictured above is John's field kitchen. The case is a Pelican 1650NF Protector Case with Padded Divider fitted. Implements like tongs, spatulas, knives, and so on are held in the Henckels knife roll. A Heavy-Duty Multi-Purpose Cook Set V is stored in the corner. The cardboard box contains a cast-iron griddle/grill. Below the griddle/grill is a wooden cutting board.

Snow Peak Standard Model Two Burner (GS-220)

A Pelican Products 1659 Lid Organizer keeps spices, oils, and other cooking gear clean and organized.

Snow Peak Standard Model Two Burner (GS-220)

An old camp table is disassembled and just barely fits into the 1650.

Snow Peak Standard Model Two Burner (GS-220)

The Standard Model Two Burner easily fits in the 1650, with room left over for the camp table and other items.

Snow Peak Standard Model Two Burner (GS-220)

John put a PRIMUS decal on his 1650 to differentiate it from our other 1650s (we have many). This was before Pelican Products offered different colors for the 1650NF case. Now with the availability of olive drab and desert tan, it would be easier and more effective to use a different-colored Pelican box.

Snow Peak Double Burner Case (GS-220B)

If you already have a separate field kitchen and just want a nice way to store and transport your Snow Peak Double Burner, there is the Double Burner Case.

Snow Peak Double Burner Case (GS-220B)

The Double Burner Case will fit either the Snow Peak Double Burner or the Snow Peak Double Barbeque Box, plus a few extras. The Double Burner Case clamshells open and closed with two zippers for easy access.

Snow Peak Double Burner Case (GS-220B)

The Double Burner Case is constructed of heavy canvas to give many years of hard service.

Snow Peak Double Burner Case (GS-220B)

The outside of the Double Burner Case has an accessory pocket that is large enough to hold a W-sized bamboo insert or other items.

Snow Peak Double Burner Case (GS-220B)

The inside of the Double Burner Case features mesh pockets with velcro closures. These are large enough to hold various cooking utensils or S-sized IGT items like bamboo or stainless steel inserts.

Snow Peak Double Burner Case (GS-220B)

The Double Burner Case is a beautiful and useful accessory for your Double Burner or Double Barbeque Box.

Snow Peak Classic Kettle 1.8 (CS-270)

The Classic Kettle 1.8 has great beauty and many little details that make it a pleasure to use both in the field and at home. Construction is all stainless steel.

Snow Peak Classic Kettle 1.8 (CS-270)

The handle is made of two sheetmetal pressings rather than one to make the handle more comfortable to hold when the Kettle is filled to its 1.8L (60 oz.) capacity. The double construction of the handle also makes it cool faster and better than if the same amount of handle material were made into a single layer.

Snow Peak Classic Kettle 1.8 (CS-270)

The folding spout cover features a spring hook. When closed, the spout cover helps to speed boiling and keep the kettle's contents hot when not in use.

Snow Peak Classic Kettle 1.8 (CS-270)

When the spout cover is flipped open to pour, the spring hook keeps the spout cover open and the Kettle's lid closed.

Snow Peak Classic Kettle 1.8 (CS-270)

When pouring, there is no need to hold the spout cover open or the lid closed. Even when trying to pour out the last drops of liquid inside the Kettle, the lid will not swing open. This may seem like a small detail, but will not be when you have the Kettle in one hand and a mug in the other. Then it will become a big detail.

Snow Peak Classic Kettle 1.8 (CS-270)

The Kettle's lid features a convenient thumb tab.

Snow Peak Classic Kettle 1.8 (CS-270)

To check the contents of the Kettle, simply press down with your thumb and the lid will hinge open. The thumb tab also limits the lid's swing arc to about 120 degrees that it will not accidentally flip open onto your hand.

Snow Peak Classic Kettle 1.8 (CS-270)

The Kettle's hanger loop enables the Kettle to be hung open an open fire in the field. The hanger loop's swing arc is limited to 90 degrees that it will always remain clear of the spout during pouring.

Snow Peak Classic Kettle 1.8 (CS-270)

If you desire, you may hold down the hanger loop with your thumb during pouring, but this is not really necessary.

Snow Peak Tableware Set L Family (TW-021F)

The Tableware Set L Family is a 16-piece set composed of four large plates, four large bowls, four medium bowls, and four small bowls. As its name suggests, the Tableware Set L Family is designed for family camping.

Snow Peak Tableware Set L Family (TW-021F) Snow Peak Tableware Set L Family (TW-021F)

The plates and bowls are constructed of 18-8 stainless steel and are 0.4mm thick to be lightweight yet tough.

Snow Peak Tableware Set L Family (TW-021F) Snow Peak Tableware Set L Family (TW-021F) Snow Peak Tableware Set L Family (TW-021F)

The plates and bowls stack within one another to minimize storage space and facilitate transport. When stacked together, the Tableware Set L Family measures 8.3" wide by 3" tall and weighs 62 oz. A nylon mesh bag is included.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

The Medium Pack & Carry Fireplace is designed for campgrounds without dedicated fire rings and where campfires are prohibited without a fire pan. Photo by Chris Self.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

A makeshift campfire scars the earth and violates Tread Lightly! principles. The Medium Pack & Carry Fireplace allows enjoyment of a campfire and leaves no trace. Photo by Chris Self.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

The Medium Pack & Carry Fireplace is constructed of stainless steel and folds flat for easier storage and transportation. The Medium Pack & Carry Fireplace measures 13.8" x 13.8" x 9.8" open and 17.8" x 20.3" x 1.3" folded, so it will fit into a Pelican 1610NF or 1650NF Protector Case. The Medium Fireplace weighs 7 lbs 11 oz. Photo by Chris Self.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

If you want to set a bigger-is-better bonfire in your camp, this product is not for you. Photo by Chris Self.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

A lightweight transport bag is included with the Medium Fireplace. For holding the Medium Fireplace and its appurtenances, which can add up to a substantial amount of weight, we recommend the Complete Carrying Case.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

The Medium Fireplace's seams are not perfect and there are gaps.

Snow Peak Medium Pack & Carry Fireplace (ST-033)

These gaps exist on purpose to improve air circulation to the fire contained within.

Snow Peak Medium Fireplace Base Plate (ST-033BP)

The Medium Fireplace Base Plate collects the ash that inevitably falls through the bottom of the Medium Pack & Carry Fireplace and also protects the ground from heat damage. Remember, leave no trace.

Snow Peak Medium Fireplace Base Plate (ST-033BP)

Slots cut into the Base Plate mate with the legs of the Medium Fireplace and lock them into place for greater security against tipping the Medium Fireplace on sloping ground surfaces.

Snow Peak Medium Fireplace Cast Iron Charcoal Bed (ST-033S)

The Medium Fireplace Cast Iron Charcoal Bed fits into the Medium Pack & Carry Fireplace.

Snow Peak Medium Fireplace Cast Iron Charcoal Bed (ST-033S)

Charcoal placed inside the Medium Fireplace would collect at the bottom and not burn efficiently. Charcoal sits on the Charcoal Bed and is raised off the Fireplace's floor, improving air circulation and combustion efficiency.

Snow Peak Medium Fireplace Cast Iron Charcoal Bed (ST-033S)

The Cast Iron Charcoal Bed is also suitable for holding a Dutch oven or pot inside the Fireplace. Constructed of cast iron, the Charcoal Bed is capable of withstanding the very high heat of charcoal fires and campfires without warping.

Snow Peak Medium Fireplace Grill Bridge (ST-033GB)

The Medium Fireplace Grill Bridge fits onto the Medium Fireplace,

Snow Peak Medium Fireplace Grill (ST-033GN)

and the Medium Fireplace Grill fits onto the Grill Bridge.

Snow Peak Medium Fireplace Grill Bridge (ST-033GB)

The Medium Fireplace Grill Bridge adjusts to three different heights to adjust the heat from the Pack & Carry Fireplace for optimum cooking. You can have your food right on the fire or above it, whichever you prefer at the time.

Snow Peak Medium Fireplace Grill Bridge (ST-033GB) Snow Peak Medium Fireplace Grill Bridge (ST-033GB)

The Grill Bridge folds flat when not in use to take up a minimal amount of storage space and facilitate transportation.

Snow Peak Medium Fireplace Complete Carrying Case (ST-033BR)

The Complete Carry Case is roomy enough to store and transport the Medium Pack & Carry Fireplace, Fireplace Base Plate, Cast Iron Charcoal Bed, Grill, and Grill Bridge. A fully loaded Complete Carrying Case will still fit inside a Pelican Products 1610NF or 1650NF Protector Case.

Snow Peak Medium Fireplace Complete Carrying Case (ST-033BR)

The Complete Carrying Case is constructed of No. 8 canvas and is lined with PVC to prevent soiling and damage.

Snow Peak Medium Fireplace Complete Carrying Case (ST-033BR)

The exterior of the Complete Carrying Case is fitted with a mesh pocket.

Snow Peak GigaPower 2 Way Torch (GT-100)

The GigaPower 2 Way Torch is a high-output torch designed to facilitate ignition of charcoal and campfires.

Snow Peak GigaPower 2 Way Torch (GT-100)

If you like to cook with a dutch oven and need to ignite charcoal, the GigaPower 2 Way Torch is a very small and handy device to have at your disposal. The GigaPower 2 Way Torch is equally handy for starting campfires.

Snow Peak GigaPower 2 Way Torch (GT-100)

In these roles it performs admirably.

Snow Peak GigaPower 2 Way Torch (GT-100)

We like the GigaPower 2 Way Torch just as much as a portable torch for field tool kits. The GigaPower 2 Way Torch is considerably smaller than a dedicated propane torch and offers the flexibility of using the Lindal Valve gas canisters, which one needs to carry for cooking in any case. If you have ever needed a torch in the field and had to resort to your camp stove for high heat, you know how handy a dedicated torch can be in the field. However, carrying a dedicated propane torch is inconvenient because of its size. The GigaPower 2 Way Torch solves that problem.

Snow Peak GigaPower 2 Way Torch (GT-100)

The GigaPower 2 Way Torch is suitable for any task for which a torch would be used. John reshafted his wedges by using the GigaPower 2 Way Torch to break the epoxy bond on the old shafts.

Snow Peak GigaPower 2 Way Torch (GT-100)

The flame from the GigaPower 2 Way Torch is overkill for such small torch jobs.

Snow Peak GigaPower 2 Way Torch (GT-100)

The GigaPower 2 Way Torch generates enough heat that breaking epoxy bonds is child's play.

Snow Peak GigaPower 2 Way Torch (GT-100)

The GigaPower 2 Way Torch features a generator within the torch head to facilitate a full and powerful flame immediately after ignition, and also to permit torch function with the unit completely upside down.

Snow Peak GigaPower 2 Way Torch (GT-100)

The flame output is controlled via a valve on the main body.

Snow Peak GigaPower 2 Way Torch (GT-100)

Even on low power the GigaPower 2 Way Torch offers tremendous heat output.

Snow Peak GigaPower 2 Way Torch (GT-100)

On high power, the GigaPower 2 Way Torch has a 14,000 BTU output.

Snow Peak GigaPower 2 Way Torch (GT-100)

The GigaPower 2 Way Torch offers outstanding flexibility, as it may be used with either canister fuels with Lindal Valve threading or CB cartridges by simply attaching or removing the included adapter.

Snow Peak GigaPower 2 Way Torch (GT-100)

Without the CB adapter fitted, the GigaPower 2 Way Torch simply threads onto all gas canister systems with standard Lindal Valve threading, like the Snow Peak GigaPower,

Snow Peak GigaPower 2 Way Torch (GT-100)

and PRIMUS PowerGas systems.

Snow Peak GigaPower 2 Way Torch (GT-100) Snow Peak GigaPower 2 Way Torch (GT-100)

For even greater flexibility, the GigaPower 2 Way Torch comes standard with an adapter that enables use of CB gas cartridges.

Snow Peak GigaPower 2 Way Torch (GT-100)

CB cartridges are popular in Asia and are widely available for cheap in Asian markets. These cartridges typically sell for about $1 apiece for a 220g can. That's cheap.

Snow Peak GigaPower 2 Way Torch (GT-100)

The input side of the CB adapter locks into the output end of the CB cartridge.

Snow Peak GigaPower 2 Way Torch (GT-100)

The output end of the CB adapter features Lindal Valve threading.

Snow Peak GigaPower 2 Way Torch (GT-100)

Thus, gear that employs Lindal Valve threading may be used with CB cartridges.

Snow Peak GigaPower 2 Way Torch (GT-100)

With the CB adapter, this GigaPower Lantern With Auto Igniter may be used with the CB cartridge.

Snow Peak GigaPower 2 Way Torch (GT-100)

This PRIMUS Filling Adapter may be used with CB cartridges as well. Even if you don't regularly use CB cartridges, keep the CB adapter in your field tool set or field kitchen in case you run out of fuel and someone else in your party has CB cartridges handy. The CB adapter is so small and takes so little room, there is really no reason not to carry it with you at all times.

Snow Peak Folding Torch (GT-110)

The Snow Peak Folding Torch is an evolution of the older GigaPower 2 Way Torch,

Snow Peak Folding Torch (GT-110) Snow Peak Folding Torch (GT-110)

and the primary difference is the wood handle that hinges open for use and closed for storage and transport.

Snow Peak Folding Torch (GT-110)

The open handle is easier to use than the handle-less GigaPower 2 Way Torch because the user can hold the handle rather than the gas canister.

Snow Peak Folding Torch (GT-110) Snow Peak Folding Torch (GT-110)

The Folding Torch's hinge is designed so that the handle cannot hinge closed inadvertently when a gas canister is fitted,

Snow Peak Folding Torch (GT-110)

and there is plenty of hand clearance.

Snow Peak Folding Torch (GT-110) Snow Peak Folding Torch (GT-110)

The Folding Torch is adjustable for output intensity and the regulator handle folds for compact storage and transport.

Snow Peak Folding Torch (GT-110)

The Folding Torch offers the flexibility of being powered by standard Lindal Valve canisters like the Snow Peak GigaPower and PRIMUS PowerGas systems. A generator within the torch's head permits the unit to operate at full heat immediately after ignition and with the unit inverted.

Snow Peak Folding Torch (GT-110)

Included is a CB adapter that will let the Folding Torch work with inexpensive CB gas cartridges. The CB adapter will also permit one to use other Lindal Valve equipment with CB cartridges.

Snow Peak Folding Torch (GT-110)

The CB adapter goes between the Folding Torch and CB gas cartridge,

Snow Peak Folding Torch (GT-110)

and the Folding Torch's adjustments remain effective and unchanged.

Snow Peak Folding Torch (GT-110)

A black nylon carry pouch is also included.

Snow Peak Solid Stake 30 (R-103)

The Solid Stake 30 is a ground stake that you can depend upon to drive deeply and surely into the firmest ground, and then stay there. The Solid Stake 30 is constructed of heat-processed steel that is forged into shape. The 55C steel material is heated to 2000 degrees in a furnace and then forged into shape by a mechanical press for maximum strength.

Snow Peak Solid Stake 30 (R-103)

The tips on the Solid Stake 30 are pointed for easier insertion into hard ground.

Snow Peak Solid Stake 30 (R-103)

The Solid Stake 30's head is shaped to maximize utility. The striking face is shaped with square edges so as to maximize driving force and to prevent slipping of the hammer's head on mis-hits. The hook both secures guy lines and sticks into the ground to prevent the Solid Stake 30 from rotating once driven fully into the ground.

Snow Peak Solid Stake 30 (R-103)

The eyelet mates with the hook on the Peg Hammer PRO.C for easy removal from the ground. Everything about the Solid Stake 30 is well thought out.

Snow Peak Peg Hammer PRO.C (N-001)

The Peg Hammer PRO.C is a copper-faced hammer designed for driving stakes into the ground without damaging the stakes. The Peg Hammer's soft copper striking face is designed to deform and peen rather than peening the stakes (the copper striking face is replaceable after several years of hard use), which also decreases the pounding to the user's hand.

Snow Peak Peg Hammer PRO.C (N-001)

The forged steel head features a hook for removing the Solid Stakes from the ground, and an eyelet for removing conventional stakes with hooked heads.

Snow Peak Peg Hammer PRO.C (N-001)

The Peg Hammer's handle is made of oak. A wooden handle on a percussion device like the Peg Hammer delivers a stronger blow because the wooden handle does not absorb recoil. Thus, the user can hold the hammer lightly and yet deliver powerful and accurate blows. If you doubt this, try wrapping the handle of a hammer with rubber or foam and see what kind of results you get on nails. You will not be pleased. Wood does not absorb recoil and delivers all of the energy of the blow to the target while permitting maximum indexing and precision. The Peg Hammer's handle is taller than it is wide, and tapers slightly from back to front. Thus, the handle does not stick to the user's hands in cold weather, does not absorb recoil and delivers a powerful and precisely controllable blow to its target even when held lightly, permits the user to know exactly where the head of the hammer is pointing at all times, permits the user to change swing directions and angles of impact very precisely, prevents the hammer from turning within the user's hand on mis-hits, and permits the user to maintain a light and lively hold while swinging the hammer for greater dexterity and impact force.

Snow Peak Peg Hammer PRO.C (N-001)

The oak handle is reinforced with steel plates and rivets where it plugs into the hammer's head. A detachable lanyard is included.

Snow Peak Peg Hammer PRO.C (N-001)

The Peg Hammer also makes an excellent general-purpose hammer for field tool kits, as it will still deliver shocks and hard blows without peening things like drivetrain components.

Snow Peak Peg Hammer PRO.C (N-001)

For example, disassembling a CV joint is best accomplished with a copper or bronze mallet. A steel hammer is not good for this application because it could peen the edge of the bell. A soft mallet does not deliver shock to the components to overcome the tension of the retaining ring. A bronze or copper mallet is perfect for this task. It delivers shock but does not mangle the CV Joint. Photo by David Shechter.

Facom Punch Set

This set of punches is also best used with a bronze or copper mallet. A soft mallet will absorb recoil and not deliver the blow required to use these punches effectively. With so much energy lost during such an attenuated impact, the user cannot get a feel for the force required and is always striking too soft or too hard of a blow. A steel hammer will deliver a good blow, but it will also peen the striking faces of these punches. A bronze or copper hammer is perfect. Think of the many tools in your arsenal, and many uses for the Peg Hammer will occur to you.

Snow Peak Peg Hammer PRO.C (N-001)

Both the Solid Stake 30 and Peg Hammer PRO.C are roughly 12" long.

Snow Peak Peg Hammer PRO.C (N-001) Snow Peak Peg Hammer PRO.C (N-001)

Thus, they fit very nicely into a Bucket Boss Tool Roll.

Snow Peak Peg Hammer PRO.C (N-001)

Just put your Solid Stake 30s and Peg Hammer PRO.C into your Tool Roll and keep them with the rest of your camping gear. Your stakes and hammer are together, and the rest of your camping equipment is insulated from abrasion or other damage. There is very little wasted space with this set-up.

GSI Outdoors Lexan Wine Glass

While enjoying your Snow Peak gear in the field, complement your field meals with GSI Outdoors Lexan Glassware. The GSI Outdoors Lexan Wine Glass is constructed of lightweight and virtually unbreakable Lexan resin.

GSI Outdoors Lexan Wine Glass

The Lexan Wine Glass is a two-piece design. The stem unthreads from the bowl and nests within the bowl for space-efficient storage and transport. (GSI refers to this efficient storage as nesting while Snow Peak refers to it as stacking. Same thing.) The stem's base is a friction fit with the the bowl's mouth so that the stem will remain affixed to the bowl during storage and transport.

GSI Outdoors Lexan Wine Glass

Drinking wine out of the Lexan Wine Glass is not ideal, but it is much nicer than drinking wine out of a paper or plastic cup.

Bibler I-Tent

For tents, our favorite by far is the Bibler I-Tent, a two-person tent that is exceptionally strong, waterproof, breathable, and simple to set up. Time-tested Bibler tents have proven themselves to be the finest, most robust, and most stormproof shelters available. Each Bibler tent is built to function in the harshest conditions, including howling winds, heavy snow loads, and sub-zero temperatures. The entire I-Tent is constructed entirely of ToddTex fabric (Bibler's proprietary version of Gore-Tex), completely eliminating the need for a separate rain fly in foul weather and giving exceptional breatheability. Secure your Bibler with some Solid Stake 30s and the tent will tear apart before becoming unmoored from the ground.

Engel 45 Freezer Fridge With Transit Bag

The Engel Freezer Fridge is an indispensable unit to enjoyable car camping.

Field Sandwich - Snow Peak

With the Engel, there is no melting ice. Sandwich ingredients stay cold and fresh and dry. Meats and cheeses do not go bad. Bread does not get soggy.

Yellow Bell Peppers - Snow Peak Carry-On Chopsticks

Vegetables stay nice and fresh. When cut, the cuts are clean and not smeared because the vegetables remain crispy fresh within the Engel.

Iron Chef Ingredients - Snow Peak Carry-On Chopsticks

These ingredients just emerged from an Engel 45. They are perfectly chilled, fresh, and dry. That's the Engel difference.

Victorinox SwissTool X

If you are looking for an excellent multitool, we recommend the Victorinox SwissTool. The SwissTools are to multitools what Snow Peak utensils are to field cutlery. Both represent the best of their type and are without peer.